Water Sampling Equipment in Newfoundland

Served | Office inNear
426 Results found
  • Category: Monitoring & Testing ×

  • Subcategory: Water Sampling ×

  • Location: Canada ×

  • Location: Newfoundland ×

Stormwater Sampling

by New Pig Corporation     based in Tipton, PENNSYLVANIA (USA)

For storm water sampling that helps you stay in compliance with environmental regulations, try New Pig's line of storm water control and storm water sampling products. Make them part of your storm water pollution prevention and storm water management efforts.

Markland - Automatic Duckbill Sampler

by Markland Specialty Engineering Ltd.     based in Georgetown, ONTARIO (CANADA)

Automate sampling; Eliminate the need for staff to manually sample. Reduce maintenance costs; No pump and no vacuum system mean trouble-free sampling.

Wildco Alpha Horizontal and Vertical Water Bottles

by Forestry Suppliers, Inc.     based in Jackson, MISSISSIPPI (USA)

Collect water samples at any depth! Features flexible polyurethane end seals, transparent acrylic cylinder and amber latex closure tubing for resistance to sunlight. 2.2 Liter capacity. Available in horizontal style for stratification and near bottom studies or vertical style for series sampling. Requires line and messenger (sold separately).

Student Water Sampler

by Forestry Suppliers, Inc.     based in Jackson, MISSISSIPPI (USA)

Water can be sampled from any depth as a single-line trigger mechanism uses one line to both raise and lower sampler as well as trigger device to seal collection chamber. Efficient flow-through design provides ample 1.5 liter volume of water for determining temperature and dissolved oxygen content. Includes 48´ of cord and instructions. ...

Snap Sampler - Passive Groundwater Sampling System

by ProHydro, Inc.     based in Fairport, NEW YORK (USA)

The Snap Sampler is a passive/no-purge groundwater sampling device that employs a unique double-opening sample bottles seal under the water surface using a remote trigger. Snap Samplers are deployed into the monitoring well, allowed to equilibrate with the surrounding aquifer, then triggered to close downhole. The trigger releases an internal, PFA ...

Westbay - Sampling Probes System

by Schlumberger Water Services     based in Kitchener, ONTARIO (CANADA)

Westbay Systems offers the unique ability to collect discrete fluid samples at formation pressure you’re your multilevel well without purging.

KC - Model HAPS - Bottom Corer

by KC-Denmark A/S     based in Silkeborg, DENMARK

Application: The KC HAPS Bottom corer is highly suitable for taking well defined, undisturbed samples from hard as well as soft sediments. This can be seen by a clear water phase above the sediment surface. It's weight of 168 kg (maximum load) demands winch operation.

Model 1, 2 and 3 Litres - Integrated, Tubular Water Sampler

by KC-Denmark A/S     based in Silkeborg, DENMARK

Application: Collecting vertical water samples of 1 or 2 meters height. General: Integrated water sampler, tube ø40 mm x 100 cm, (polycarbonate), sample volume 1 litre. Can be extended to 2 litres by adding an additional tube.

Bailer Samplers, stainless steel

by Eijkelkamp Agrisearch Equipment     based in Giesbeek, NETHERLANDS

The stainless steel and the teflon bailer samplers have been developed to sample still water at any required depth. 12.04 Bailer sampler, stainless steel. This bailer sampler consists of a stainless steel tube with a 33 mm diameter and contents of 250 ml, open at the top-end and fitted with and unscrewable cap at the bottom. A ball check is fitted ...

Blackburn - Model Coliwasa - Composite Liquid Waste Sampler

by Blackburn Sampling, Inc.     based in Galesburg, ILLINOIS (USA)

Use Blackburn Coliwasa to take representative samples of hazardous wastes, liquids, slurry-type sludge's and semi-solids from top to bottom of buckets, barrels, tanks or tankers. Also great for Q. A. and process sampling.

Need help finding the right suppliers?

Let the XPRTs do the work for you