Water Sampling Equipment in Rhode Island

Served | Office inNear
643 Results found
  • Category: Monitoring & Testing ×

  • Subcategory: Water Sampling ×

  • Location: USA ×

  • Location: Rhode Island ×

Voss SingleSample - Model CW-01 5 - Coliwasa

by Voss Technologies, Inc.     based in San Antonio, TEXAS (USA)

The Voss SingleSample Coliwasa is constructed entirely of inert HDPE to resist almost all chemicals and solvents. The positive displacement, rod controlled valve (shown outside of the device above) features a set of four clamping fingers to assist in holding the valve shut until you are ready to transfer your sample to a container for transport.

Voss SingleSample - Model CW-01 6 - Coliwasa

by Voss Technologies, Inc.     based in San Antonio, TEXAS (USA)

The Voss SingleSample Coliwasa is constructed entirely of inert HDPE to resist almost all chemicals and solvents. The positive displacement, rod controlled valve (shown outside of the device above) features a set of four clamping fingers to assist in holding the valve shut until you are ready to transfer your sample to a container for transport.

Voss SingleSample - Model CW-01 6.5 - Coliwasa

by Voss Technologies, Inc.     based in San Antonio, TEXAS (USA)

The Voss SingleSample Coliwasa is constructed entirely of inert HDPE to resist almost all chemicals and solvents. The positive displacement, rod controlled valve (shown outside of the device above) features a set of four clamping fingers to assist in holding the valve shut until you are ready to transfer your sample to a container for transport.

Voss SingleSample - Model CW-01 7 - Coliwasa

by Voss Technologies, Inc.     based in San Antonio, TEXAS (USA)

The Voss SingleSample Coliwasa is constructed entirely of inert HDPE to resist almost all chemicals and solvents. The positive displacement, rod controlled valve (shown outside of the device above) features a set of four clamping fingers to assist in holding the valve shut until you are ready to transfer your sample to a container for transport.

Niskin - Model 2.5L ROV - Water Sample

by General Oceanics Inc.     based in Miami, FLORIDA (USA)

Water Samp, Niskin 2.5L ROV. Simple Niskin Style bottle without mounting fixtures, must be strapped to the ROV and triggered via the manipulator arm.

Model Strio-E - Proprietary, Water-rich, Surface Modified Polymeric Sorbent

by StrioChem Technologies, Inc.     based in Rancho Santa Margarita, CALIFORNIA (USA)

Strio-E is a proprietary, water-rich, surface modified polymeric sorbent that extracts acidic, basic and neutral analytes from bio-fluid and other aqueous samples. A unique and revolutionary outer (Hydrophilic) surface and non-polar inner (Hydrophobic) backbone allows exceptional phase transfer of analytes into polymer backbone. This revolutionary ...

Well Development Swabs

by GeoPump, Inc.     based in Medina, NEW YORK (USA)

GeoPump Well Development Swabs offer a simple, effective and convenient way to accomplish this important task. Development swabs are typically used in conjunction with GeoPump gas-drive pumps simply by attaching the swab assembly to the threaded intake of the pump. This effectively increases the diameter of the pump to enable the user to produce ...

Niskin - Horizontal Water Sampling Bottles

by General Oceanics Inc.     based in Miami, FLORIDA (USA)

Non-metallic water sampler with capacity for 5l sample. Designed to operate horizontally on a wire only. Weight empty 8 lbs. (3.6kg) length 27.2'. A 1000MG Messenger is needed to operate this product, sold separately.

SBE - Model 32 - Carousel Water Sampler

by Sea-Bird Electronics, Inc.     based in Bellevue, WASHINGTON (USA)

BE 32 Carousel Water Sampler - An innovative design, free of the reliability problems associated with motor-driven types. The Carousel has no moving-shaft seals that can bind up at low temperatures or under pressure because each bottle position has its own magnetically-activated lanyard release latch. Only the magnetic field -- not a moving part ...

Model S-5000 - Stationary Vacuum Fluid Samplers

by Manning Environmental Inc.     based in Georgetown, TEXAS (USA)

This design has been in demand for over 40 years. Simple and robust, some of these units are still in the field taking daily samples after 30 years in the harshest environments. A favorite for pulp mills and industry it has the vacuum advantages: Anti-Clog technology to keep your lines free, hard and/or particulates won't damage it, and ...

Need help finding the right suppliers?

Let the XPRTs do the work for you