Wind Monitoring Equipment in Kentucky

272 Results found
  • Category: Monitoring & Testing ×

  • Subcategory: Wind Monitoring ×

  • Location: USA ×

  • Location: Kentucky ×

Wind Masts

by Nexgen_b

Compact and easy to assemble : The 3m maximum tube size of each mast section enables compact transportation and easy erection. Each mast is supplied complete with all fixings required, excluding ginpole and anchors. A hinged base and ginpole erection system enables winching up with minimal load.

Model WSD1 - Wind Speed and Direction Sensors

by Environmental Measurements Ltd

The Wind Speed section of the sensor consists of a low-inertia ABS cup assembly for fast response mounted on a dual ballrace-supported stainless steel shaft. The use of a Bremag 10 magnet operating a long life reed switch produces one bounce-free pulse per revolution of the rotor.

Model WE-24 - Wind Resource Vane

by Climatronics Corporation

Climatronics’ WE-24 wind direction sensor (P/N 102837), companion to our WE-14 wind speed resource anemometer, incorporates a precision wire-wound potentiometer for reliable and highly accurate measurement of the wind direction. The potentiometer is directly coupled to the vane assembly. Variations in wind direction produce a corresponding ...

Gill WindSonic - Ultrasonic Wind Sensor

by Isodaq Technology

The Gill instruments WindSonic Ultrasonic Wind Sensor is ideal for connection to any ISODAQ telemetry logger with the SDI-12 interface e.g. Frog RX or Hawk XT. WindSonic is a robust, low cost ultrasonic wind sensor with no moving parts. This 2-axis ultrasonic wind sensor offers maintenance-free wind speed and direction monitoring for true ...

Second Wind - Model PV-1 - Wind Vane

by Second Wind

The standard vane used in the wind energy industry. Stainless steel and thermoplastic construction for corrosion resistance. The PV-1 was developed by Second Wind in response to our customers in the field. Earlier technology too often fell short in its ability to accurately capture data in every direction and in cold, icy environments.

Stevens - Met One - Ultra Sonic Wind Speed And Direction Sensor

by Stevens Water Monitoring Systems, Inc.

The Met One Ultrasonic Wind Direction & Speed sensor is highly accurate with no moving parts, which eliminates required maintenance common to mechanical sensors. This 16-point wind tunnel calibrating sensor provides digital and analog outputs. Available with heated option.

WindSentinel - Wind Resource Assessment System

by AXYS Technologies Inc.

The WindSentinel™ is a wind resource assessment buoy that uses LiDAR to accurately measure wind speed, wind direction, and turbulence offshore at turbine hub-height and across the blade span

PCE - Model WL 1 - Wind Recorder

by PCE Instruments UK Ltd

The wind recorder PCE-WL 1 is an ideal tool to measure and store the wind speed over a long period of time. The battery enables you to use the wind recorder in situ. Since a wind power station is an expensive investment, you want to know what profits it will generate in advance. The wind recorder PCE-WL 1 helps determine these profits. The ...

ATI - Radar Wind Profiler (RWP)

by Applied Technologies, Inc. (ATI)

A radar wind profiler (RWP) is a pulse Doppler radar system, utilized to measure wind profiles from near ground to as high as 20 Km. RWP systems typically operate between 50 MHz and 1.2 GHz, and use phase-array antenna systems. The antenna points vertically, directly above the radar. The new ATI RWPs are designed around original and proprietary ...

WindScribe - Model 276 - Ultrasonic Wind Speed Meter

by Scientific Sales, Inc.

The Model 276 WindScribe Ultrasonic wind meter uses patented technology to read current wind speed, highest positive speed (headwind), lowest negative speed (tailwind), 5-second average, and running average. Select from mph, km/h, fpm, m/s, f/s, or knots, plus temperature and wind chill in tenths of degress F or C. Sensitive to breezes as low as ...

Need help finding the right suppliers?

Let the XPRTs do the work for you