

|
|









(0 votes)
The unique circuitry of our 750 Series II Resistivity Monitor/controllers guarantees accurate and reliable measurements. Drift-free performance is assured by 'field proven' electronics, including automatic DC offset compensation and highly accurate drive voltage.
| 750 Series II Resistivity Monitor/Controllers Data Sheet (PDF ... | |
| 750 Series II Resistivity Monitor/Controllers Operation Manual ... |
Built-in electronic calibration allows for fast quality checks.
A push-to-test button makes setpoint checks easy, while the internal alarm set discourages unauthorized adjustments.
Standard on all controller models is a heavy-duty, 10-amp output relay, operating on either increasing or decreasing readings. Bright green/red LEDs indicate readings above or below setpoint.
Digital and Analog 750 Series II models have an IP65/NEMA 4X water-resistant & corrosion-proof rated enclosure. At 152 x 122 mm/6 x 4.8 in., all models are suitable for panel, bench or surface mounting.
Additional options include a 3 Sensor Input Switch and/or a 3 Range Switch and a Remote Alarm™ model RA.
Temperature Compensation: Two integral temperature sensors provide automatic TC to 25ºC.
Pressure/Temp Limits: 100 psi/690 kPa @ 212ºF/100ºC.
Bushing: Modular Polypropylene threaded 3/4” NPT. 1/2” PVDF or 316 stainless steel fittings (optional).
Cable: Shielded 10 ft./3 meters standard; 25 and 100 ft./ 8 and 30 meter lengths available.
Dimensions: Metal portion 30 L x 13 Dia. mm/ 1.2 L x .5 Dia. in.; overall length 91 mm/3.6 in.

No comments were found for 750 Series II - Resistivity Monitor/Controllers. Be the first to comment!


