The dry granular or powder Floccin products are fed from a 2,000 lb. bag at a controlled rate to the hydration tank, where they are hydrated in water or untreated wastewater with the aid of a variable speed mixer. The incoming water is monitored by the ultrasonic probe and allows the system to create a consistent slurry concentration. The solution is then pumped upstream of a DAF or clarifier, where the flocculation reaction occurs.

These units are all stainless steel construction. Dimensions are approximately 3-1/2’ by 3-1/2’ by 5’ 10” tall and require a minimum 6’ clearance overhead for loading. Units have feeder baskets to accommodate a 2000 lb. bag. Feeder requires 110V/1 Φ, 20 amp service. Controlled On/Off or variable signal inputs. Self-cleaning 3/4 hp feed pump. Removable hydration tank cover.

Integrated's Floccin Slurry System:

• Consistent slurry concentrations
• Variable feed rate from 5–200 lbs/hr
• 70 gallon hydration tank
• Compact footprint
• 4 available configurations

• All 304 stainless steel construction
• Approx. dim. 3’-6” X 3’-6” x 5’-10”; Requires 6 feet of clear overhead space for placement of 2000 lb bag in basket.
• Variable feed rate from 5 lb./hr to 200 lb./ hr
• 70-gallon hydration tank, with dedicated drain
• 20 amp service at 110 VAC 1Φ
• Removable hydration tank cover
• Makeup water for slurry can be wastewater or fresh water
• Self-cleaning, ¾-hp output pump
• Ultrasonic level control and modulating valve

All Slurry System control panels feature a programmable logic controller for complete automation including the startup and shut down procedures. It features Hand/Off/Auto controls on all functions. The hydration tank water level is monitored with a no contact ultrasonic sensor for precise reliable level measurement. For safety, an emergency stop (e-stop) is standard. The slurry system can be manually turned on and off, or interfaced to the customer’s existing control(s). The hydration tank mixer, and feeder speed is controlled using variable speed controllers.

Digital Feed Rate Meter with output in lbs./hr with a reset