air pollution Equipment in Moldova

Served | Office inNear
2698 Results found
  • Keyword: air pollution ×

  • Location: Europe ×

  • Location: Moldova ×

VOC Abatement Systems

by Epcon Industrial Systems, LP     based in The Woodlands, TEXAS (USA)

A VOC Abatement System relies upon the concept of a chemical reaction – when involving organic hydrocarbons the process is called oxidation. In an oxidation process, the compounds within the air stream – VOC pollutants – are broken down from their original composition and reformed into new compounds. In the VOC Oxidation Process, ...

Wet Scrubbers

by Bakon Engineering Ltd.     based in Izmir, TURKEY

Emissions from industrial plants spreading into the air in the form of smell, smoke, fume, dust, gas, vapour or aerosol are restricted to the levels specified in the regulations. Emission rates of the plants installed Bakon Scrubbers are lowered and stays below the limit values specified in that regulation and specially employees get dust-free and ...

Waste - Unused Energy Utilization System

by Epcon Industrial Systems, LP     based in The Woodlands, TEXAS (USA)

Electrical Power Generation - Hybrid Spiral Cycles. With the application of UTC’s Hybrid Spiral Cycles, low, medium and high level heat is converted into electrical power to achieve the maximum thermal, mechanical and electrical efficiencies to minimize the capital, operational and maintenance costs and deliver higher margins.  These ...

Energy Recovery Systems

by The CMM Group     based in De Pere, WISCONSIN (USA)

Energy Recovery Systems from The CMM Group can be incorporated into new air pollution control systems (APCS) (or other high temperature emitting devices) or be retrofit or added to an existing process. Energy recovery systems utilize the 100°C (212°F) to 815°C (1,500°F) of heat energy (depending on the heat emitting technology in ...

BIOTOX - Regenerative Thermal Oxidation (RTO) Process

by Biothermica Technologies Inc.     based in Montreal, QUEBEC (CANADA)

The BIOTOX regenerative thermal oxidation process consists of oxidizing in a combustion chamber the organic compounds (vocs and cocs) contained in the industrial emissions being treated, while recovering sensible heat from combustion gases by means of ceramic beds. The recovered heat is then used to preheat entry gases thanks to an efficient heat ...

Control of Volatile Organic Compounds (VOC)

by Bakon Engineering Ltd.     based in Izmir, TURKEY

Adsorption Systems (Adsorbers) are the most effective and economical equipments to remove the Volatile Organic Compounds (VOC) from gas streams or to recover these compounds.

Control of Particulates

by Bakon Engineering Ltd.     based in Izmir, TURKEY

Venturi Scrubbers are used to control the particulate emissions. A Venturi Scrubber is an air pollution conrol equipment that uses the energy of a moving gas stream to capture the particulate matter in that gas flow. Venturi Scrubbers provide collection efficiencies of 70% - %95 for particles smaller than 10 microns.

Enviropol - Model WESP - Wet Electrostatic Precipitators for Ultra Clean Gas

by Enviropol Engineers Pvt.Ltd.     based in NOIDA, INDIA

With increasing demand, world-wide, for reduction of respirable particulate and aerosols from various industrial process, WESP technology from Enviropol-Envibat is gaining recognition due to its ability to capture sub-micron particulate with condensed acid mist unlike other dry separation techniques like Filter & Dry ESP.

Regenerative Thermal Oxidizers

by The CMM Group     based in De Pere, WISCONSIN (USA)

Regenerative Thermal Oxidizers from The CMM Group are designed to destroy air pollutants emitted from process exhaust streams at temperatures ranging from 815°C (1,500 F) to 980°C (1,800 F). Regenerative Thermal Oxidizer's utilize ceramic media packed into vertical canisters as a high-efficiency heat exchanger. Oxidation is ...

Catalytic Oxidizers

by The CMM Group     based in De Pere, WISCONSIN (USA)

Catalytic Oxidizer AirflowCatalytic Oxidizers from The CMM Group, LLC are designed to destroy air pollutants emitted from process exhaust streams at temperatures ranging from 260°C (500°F) to 345°C (650°F). Catalytic oxidizers utilize a high-efficiency counter-flow plate type heat exchanger. Oxidation is achieved as pollutants pass ...

Need help finding the right suppliers?

Let the XPRTs do the work for you