air pollution Equipment in New Jersey

Served | Office inNear
2747 Results found
  • Keyword: air pollution ×

  • Location: USA ×

  • Location: New Jersey ×

VOC Abatement Systems

by Epcon Industrial Systems, LP     based in The Woodlands, TEXAS (USA)

A VOC Abatement System relies upon the concept of a chemical reaction – when involving organic hydrocarbons the process is called oxidation. In an oxidation process, the compounds within the air stream – VOC pollutants – are broken down from their original composition and reformed into new compounds. In the VOC Oxidation Process, ...

Wet, Dry & Packed Scrubbers

by Gulf Coast Environmental Systems, LLC     based in Conroe, TEXAS (USA)

Ammonia (NH3) is a colorless, corrosive, pungent gas used in a variety of industries including pharmaceutical, fertilizer, food, chemical, and semiconductor. It has an explosive range in air from 16-25% by volume and is moderately toxic. It has an Immediately Dangerous to Life and Health (IDLH) concentration of 300 parts per million by volume ...

Waste - Unused Energy Utilization System

by Epcon Industrial Systems, LP     based in The Woodlands, TEXAS (USA)

Electrical Power Generation - Hybrid Spiral Cycles. With the application of UTC’s Hybrid Spiral Cycles, low, medium and high level heat is converted into electrical power to achieve the maximum thermal, mechanical and electrical efficiencies to minimize the capital, operational and maintenance costs and deliver higher margins.  These ...

Energy Recovery Systems

by The CMM Group     based in De Pere, WISCONSIN (USA)

Energy Recovery Systems from The CMM Group can be incorporated into new air pollution control systems (APCS) (or other high temperature emitting devices) or be retrofit or added to an existing process. Energy recovery systems utilize the 100°C (212°F) to 815°C (1,500°F) of heat energy (depending on the heat emitting technology in ...

BIOTOX - Regenerative Thermal Oxidation (RTO) Process

by Biothermica Technologies Inc.     based in Montreal, QUEBEC (CANADA)

The BIOTOX regenerative thermal oxidation process consists of oxidizing in a combustion chamber the organic compounds (vocs and cocs) contained in the industrial emissions being treated, while recovering sensible heat from combustion gases by means of ceramic beds. The recovered heat is then used to preheat entry gases thanks to an efficient heat ...

Enviropol - Model WESP - Wet Electrostatic Precipitators for Ultra Clean Gas

by Enviropol Engineers Pvt.Ltd.     based in NOIDA, INDIA

With increasing demand, world-wide, for reduction of respirable particulate and aerosols from various industrial process, WESP technology from Enviropol-Envibat is gaining recognition due to its ability to capture sub-micron particulate with condensed acid mist unlike other dry separation techniques like Filter & Dry ESP.

Regenerative Thermal Oxidizers

by The CMM Group     based in De Pere, WISCONSIN (USA)

Regenerative Thermal Oxidizers from The CMM Group are designed to destroy air pollutants emitted from process exhaust streams at temperatures ranging from 815°C (1,500 F) to 980°C (1,800 F). Regenerative Thermal Oxidizer's utilize ceramic media packed into vertical canisters as a high-efficiency heat exchanger. Oxidation is ...

Catalytic Oxidizers

by The CMM Group     based in De Pere, WISCONSIN (USA)

Catalytic Oxidizer AirflowCatalytic Oxidizers from The CMM Group, LLC are designed to destroy air pollutants emitted from process exhaust streams at temperatures ranging from 260°C (500°F) to 345°C (650°F). Catalytic oxidizers utilize a high-efficiency counter-flow plate type heat exchanger. Oxidation is achieved as pollutants pass ...

CATALYTIC - RecuperativeThermal Oxidizer

by J Carpenter Environmental LLC (JCE)     based in Muskegon, MICHIGAN (USA)

Thermal treatment of VOC's and other air pollutants works by a simple reaction of the harmful air pollutants with oxygen and heat. In this environment the VOC's are converted to water vapor and usable heat. These harmless by-products are released into the atmosphere or use an energy recovery technique to further lower the operational costs.

TEK-JET 4500 - Solvent Based Spray Cabinet Automated Cleaning System

by Inland Technology     based in Tacoma, WASHINGTON (USA)

The TEK-JET 4500 was designed at the request of the U.S. Navy (Navair) to combine the power and freedom from corrosion and hydrogen embrittlement of hydrocarbon solvent cleaning with the convenience and ease of use of an automated spray cabinet cleaning system.It is compliant to the VOC Exemption for air-tight cleaning.

Need help finding the right suppliers?

Let the XPRTs do the work for you