Ambient Air Equipment In North Carolina
-
Manufactured by AER Control Systemsbased in USA
Designed to filter Ambient Dust; Good for warehouses and manufacturing shops; 2000 CFM Airflow; 48 Long x 24x 24; Direct Drive Blower, 3/4HP Open Motor; 115V 60HZ Single Phase/ Optional Voltage Available; Heavy Duty 16-Gauge Welded Steel Cabinet; Power Cord with Top-Mounted 2-Speed Rocker Switch for; Easy Installation; Tool-less and Quick ...
-
Manufactured by Tisch Environmental Incbased in USA
The PQ200 is designed to meet exacting criteria for collecting 24-hour samples of ambient 'Fine Particulate,' according to the U.S. National Ambient Air Quality Standards (NAAQS), published July 18, 1997. The Very Sharp Cut Cyclone (VSCC) has replaced the WINS impactor and allows 30 days between cleaning intervals. Further details may be ...
-
Manufactured by Tisch Environmental Incbased in USA
PUF for Pesticide Particulate/Vapor Air Sampler: Complete with outdoor anodized aluminum PUF shelter, aluminum blower motor assembly, 4' particulate/vapor sampling module, flow venturi calibration valve system, 0-100' magnehelic gage, motor voltage control/elapsed time indicator, (10' exhaust hose, and 7-day mechanical timer (110v/60hz or ...
-
Manufactured by American Ecotech LLCbased in USA
At Ambilabs®, we have been designing and installing full turn-key monitoring systems for many years, including equipment deployed throughout the United States and Canada. We have extensive experience working on both small and large ambient air monitoring projects. Starting with the basic addition of an ozone monitor through to a turn-key ...
-
Manufactured by Tisch Environmental Incbased in USA
x Stage Ambient Viable Sampler. System includes Six Aluminum Orifice Stages, Silicone O-ring Gaskets, Vacuum Pump Assembly and Carrying Case complete Single stage viable impactor operating at 28.3 LPM (Same as two ...
-
Manufactured by Tisch Environmental Incbased in USA
Eight Stage Ambient Sampler System Includes: 8 Aluminum Orifice Stages, 8 Stainless Steel Collection Plates, Back up 81mm Filter Holder. 11 Silicone O-Ring Gaskets, Vacuum Pump Assembly and Carrying Case ...
-
Manufactured by Mesa Laboratories, Inc.based in USA
The BGI PQ200 FRM Sampler uses BGI pioneering technology to meet and exceed the requirements for ambient particulate sampling dictated by the U.S Environmental Protection Agency. This includes the design of reliable PM10, PM2.5 and PM1 Inlets, volumetric sample flow rate control, data logging and software for report and data ...
-
Manufactured by Tisch Environmental Incbased in USA
Includes size selective inlet (<10 micron cut size), anodized aluminum shelter, 8' x 10' stainless steel filter holder with stagnation pressure tap, blower motor assembly, continuous flow/pressure recorder, solid state digital timer programmer with digital elapsed time indicator, 30' water manometer, volumetric flow controller with look up ...
-
Manufactured by Tisch Environmental Incbased in USA
Volumetric Flow Controlled Total Suspended Particulate TSP High Volume Air Sampling System. Includes anodized aluminum shelter, 8' x 10' stainless steel filter holder with stagnation pressure tap, blower motor assembly, continuous/flow pressure recorder, elapsed time indicator, 30' manometer, volumetric flow controller with look up table,7 ...
-
Manufactured by Tisch Environmental Incbased in USA
The Hi-Vol PM 2.5 ambient air sampler is designed to provide owners of our TE-6001 PM-10 samplers with the option of retrofitiing existing equipment rather than procure a new family of apparatus. An adapter is placed into the model TE-6001 sampler in lieu of the existing PM 2.5 fractonator. The adapter has a new plate that contains ...
-
Manufactured by Tisch Environmental Incbased in USA
Mass Flow Controlled PM10 System. Includes size selective inlet (<10 micron cut size), anodized aluminum shelter, 8' x 10' stainless steel filter holder with probe hole, blower motor assembly, continuous flow/pressure recorder, combination mass flow controller w/20-60 SCFM air flow probe, time indicator, 30' water manometer, filter media ...
-
Manufactured by Tisch Environmental Incbased in USA
PM-10 High Volume Monitor: Complete with Size selective inlet, outdoor anodized aluminum shelter, aluminum blower motor assembly, 8' x 10' stainless steel filter holder, mass flow controller with 20/60 scfm flow probe,7-day mechanical timer, elapsed time indicator, continuous flow/pressure recorder, and filter media holder/filter paper cartridge (110v/60hz or ...
-
Manufactured by Tisch Environmental Incbased in USA
The series TE-230 provides a simple, accurate, and yet low-cost means of obtaining the particle size distribution and respirable mass fraction of suspended particulates in outdoor and occupational environments. The unique slotted impactor design features the ultimate in precision, predictability, and sharpness of cut-off, combined with compactness, ease-of-use, and the lowest internal ...
-
Manufactured by Tisch Environmental Incbased in USA
TSP Tri-pod High Volume Air sampler: Complete with outdoor anodized aluminum tri-pod shelter, aluminum blower motor assembly, 8' x 10' stainless steel filter holder, 30' slack tube manometer, and motor speed voltage control/elapsed time indicator (110v/60hz or ...
-
Manufactured by Tisch Environmental Incbased in USA
Includes size selective inlet (<10 micron cut size), anodized aluminum shelter, 8' x 10' stainless steel filter holder with stagnation pressure tap, blower motor assembly, continuous flow/pressure recorder, elapsed time indicator, 30' water manometer, filter media holder/filter paper cartridge, ( 8 x 10), volumetric flow controller with look up table, 7 day mechanical ...
-
Manufactured by Tisch Environmental Incbased in USA
Mass Flow Controlled Total Suspended Particulate High Volume Air Sampling System Includes: Anodized aluminum shelter, 8' x 10' stainless steel filter holder with probe hole, aluminum blower motor assembly, continuous flow/pressure recorder, combination mass flow controller w/20-60 SCFM air flow probe and digital timer with digital elapsed ...
-
Manufactured by Tisch Environmental Incbased in USA
Mass Flow Controlled Total Suspended Particulate TSP High Volume Air Sampling System. Includes anodized aluminum shelter, 8" x 10" stainless steel filter holder with probe hole, aluminum blower motor assembly, continuous/flow pressure recorder, elapsed time indicator, mass flow controller w/20-60 SCFM air flow probe, and 7-day mechanical ...
-
Manufactured by SPX Corporationbased in USA
, ambient air condenses much of the moisture before it exits the tower thereby reducing the plume. ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
Advanced non-contact infrared thermometer designed for measuring the gas temperature within waste incinerators. The CDA thermometer is optimised to accurately measure the gas temperature in waste incinerators using AMETEK Land’s unique non-contact infrared technology. CDA ‘sees’ through a cold ambient air to measure the ...
-
PremiumManufactured by Flottweg SEbased in GERMANY
Mobile Sludge Dewatering in a Container: Connect and Dewater. In small sewage treatment plants, the investment costs for dewatering and thickening of incoming sludge frequently plays a decisive role. In stationary dewatering systems, for example, the construction of a new building or the expansion of existing space can be significantly costly. You can avoid those costs with mobile container ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you