backflow Equipment in Hungary

Served | Office inNear
3183 Results found
  • Keyword: backflow ×

  • Location: Europe ×

  • Location: Hungary ×

Wapro Access - Model WaBack Series - Inspection Chamber

by Wapro AB     based in Karlshamn, SWEDEN

Wapr Access Chamber is a complete inspection chamber Ø400 with DN110 connections. Inside the chamber is a WaBack backwater valve to prevent backflow. The ‘easy-remove’ backwater valve can be removed from ground level allowing easy rinsing and allows simple inspection. The WaBack module can be installed on sewage, drainage and ...

Model PN10 - Back Flow Preventer

by FireDos GmbH     based in Wölfersheim / Industriegebiet, GERMANY

Depending on the connection situation of the FireDos wall hydrant cabinet, a backflow preventer might be necessary to prevent the return flow of the extinguishing water. Important: When the FireDos wall hydrant cabinet is supposed to be connected to the public water network, current local technical regulations must be observed. For operating ...

Model 97220 - Back Pressure Check Valve

by Shand & Jurs (L&J Technologies & L&J Engineering)     based in Hillside, ILLINOIS (USA)

The Shand & Jurs Biogas 97220 Back Pressure Check Valve uses a free swinging 'pendulum' pallet design to provide maximum flow rates with a minimum pressure drop in low pressure gas control lines.

IPS - Suck Back Valves

by International Polymer Solutions Inc     based in Irvine, CALIFORNIA (USA)

Our IPS Suckback Valves are ideal for acid, solvent, photoresist solutions and other process dispensed chemistries. The IPS Suckback Valve will pull a vacuum and prevent excessive dripping from the dispensing nozzle. The IPS Suckback Valve is constructed of an“all wetted” PTFE media flow path. Our 104168 Suckback Valve incorporates the ...

Purair - Model FLOW - Laminar Flow Cabinet

by Air Science USA     based in Fort Myers, FLORIDA (USA)

The Purair FLOW Series vertical laminar flow cabinets are compact, ideal for use in laboratory environments where space is limited, designed to protect equipment and other contents of the work zone from particulates with HEPA filtration.

Singer Valve - Model 106/206-PR-SM - Pressure Reducing Control Valve with Integral Back-Up

by Singer Valve Inc.     based in Surrey, BRITISH COLUMBIA (CANADA)

The 106-PR-SM and 206-PR-SM series control valves are engineered to be used anywhere pressure reducing valve failure is unacceptable. These valves have a second and independent operating system superimposed upon the standard primary system. With the assurance of a back-up system, maintenance schedules may be extended as pressures will

Greyline - Model DFM 5.1 - Doppler Flow Meter

by Greyline Instruments Inc.     based in Long Sault, ONTARIO (CANADA)

Measure flow from outside a pipe. The Greyline DFM 5.1 is designed for 'difficult liquids' that would damage regular flow meters - wastewater, slurries, sludge, chemicals, viscous liquids and abrasives. There is no obstruction to flow and no pressure drop. The non-intrusive, clamp-on ultrasonic sensor fits any pipe 1/2' (12.5 mm) Inside Diameter ...

WaBack - Back Flow Valve

by MTA Messtechnik GmbH     based in Veit an der Glan, AUSTRIA

WaBack is a tried and tested solution to a wide range of flooding problems. The fact that the WaBack operates as both a backwater stop and an inspection manhole has many advantages. One of those advantages is the lower installation costs. Installing a WaBack is an 'all-in-one' installation, eliminating the need to install a seperate inspection ...

SWAN - Model M-Flow M40 - Flow Cell - Oxygen

by SWAN Analytische Instrumente AG     based in Hinwil, SWITZERLAND

Flow cell for the Swansensor Oxysafe1000. Flow cell made of PVC and acrylic glass with one M40 x 1.5 sensor opening, sensor incident flow tube. Suitable for Ø 32 mm sensors with M40 adapter, e.g. SS Oxysafe1000. Removable transparent vessel allows easy sensor calibration and maintenance.

Sentinel - Diaphragm Back Pressure Valves

by BLACOH Fluid Control, Inc.     based in Riverside, CALIFORNIA (USA)

SENTINEL diaphragm back pressure valves are designed to enhance the performance of pumping systems by applying a continuous back pressure to the system pump, while also acting as an anti-syphon valve. Robust construction ensures reliability in the rigorous service of municipal and industrial applications.  Wetted materials include: PVC, CPVC, ...

Need help finding the right suppliers?

Let the XPRTs do the work for you