Bag Filter Equipment Near Portugal
-
Manufactured by ProMinent GmbHbased in GERMANY
5-50 kg/h of dry PAC with a re-dilution of 3-5 m3/h and a final concentration of max. 1%. Conventional waste water treatment cannot adequately remove trace elements, such as medication or cosmetic residue from the waste water. This is particularly effective using the complete system for the precise metering of powdered active carbon ...
-
Manufactured by Carrier Vibrating Equipment, Inc. / Carrier Europe S.C.Abased in BELGIUM
Flash drying is an inexpensive solution to drying powders and granular materials, and is designed for high moisture materials with a constant-rate drying zone. Carrier’s industrial flash dryer systems can use higher gas temperatures, versus other dryer types, because the material retention time is very short. Flash drying is accomplished with a large quantity of gas and active heat ...
-
Manufactured by VentilAQUA, S.A.based in PORTUGAL
, the automatic reaction pH control, stirred reaction vessel, etc. The sludge produced on the reaction vessel, is automatically discharged through a pneumatic pump into a low pressure filter bag structure for dewatering, solids beeing retained inside the bags, while the claried water is sent to a final carbon activated filter ...
-
Manufactured by Madur Polska Sp. z o.o.based in POLAND
Professional flue gas analyser that combines high quality of sample conditioning with great measurement accuracy contained in a compact soft casing. Analyser is equipped with heated hose with heated filter, built-in high efficient conadensation dryer. It can be fitted with up to 9 sensors (electrochemical cells and NDIR sensors). Has ...
-
PremiumManufactured by ENVEAbased in FRANCE
Stand alone filter dust leak monitor (0-100%) for filter emissions monitoring after baghouses, cartridge filters, cyclones etc. where performance approvals are not ...
-
PremiumManufactured by ENVEAbased in FRANCE
Controller based filter dust leak monitor (0-100%) for filter emissions monitoring after bag houses, cartridge filters, cyclones ...
-
PremiumManufactured by ENVEAbased in FRANCE
The PCME DM 210 comprises a single compact sensor design with integrated user interface for reliable and robust particulate monitoring for all types of industrial processes. Additional functionality allows the instrument to measure defined units (mg/m³) with QA checks if required by the Process Operator or ...
-
PremiumManufactured by ENVEAbased in FRANCE
Continuously monitors particulate flow for signs of filter damage or broken filter bags. Compact and cost effective. The Dusty C has been specially developed to monitor clean sides after filters with high reliability and without time delay for filter breaks. It can be used in metallic ducts in which dust ...
-
PremiumManufactured by ENVEAbased in FRANCE
The PCME STACKFLOW 400 is an advanced flue gas flow measurement system for continuous monitoring of releases from industrial sources complying with European monitoring standard EN 16911-2:2013 and ...
-
PremiumManufactured by ENVEAbased in FRANCE
QAL1 approved particulate CEM providing high quality emission measurement for low dust concentrations from dry industrial processes including Baghouses and Cartridge ...
-
PremiumManufactured by ENVEAbased in FRANCE
MCERTS QAL1 approved, stand alone or multi-sensor Particulate CEM providing high quality emission measurement for low dust concentrations from dry industrial ...
-
PremiumManufactured by ENVEAbased in FRANCE
Multi-sensor dust monitor for indicative emissions trending in industrial stacks after bag filters, cartridge filters, cyclones and process driers, where regulatory approvals are not necessary. Advanced Probe Electrification featuring long term data logging for process trend analysis and ...
-
PremiumManufactured by ENVEAbased in FRANCE
The LEAK LOCATE 662 is a digitally networked, multi-compartment baghouse monitoring system providing remote observation of the condition of bag and cartridge filters. Controller based filter dust leak monitor (0-100%) for filter emissions monitoring after bag houses, cartridge filters, cyclones ...
-
PremiumManufactured by ENVEAbased in FRANCE
QAL1 TÜV approved particulate monitor providing high quality emission measurement for low dust concentrations from dry industrial processes including Baghouses and Cartridge ...
-
PremiumManufactured by ENVEAbased in FRANCE
The PCME LEAK LOCATE 320 PLUS is a digitally networked, multi-compartment baghouse monitoring system providing remote observation of the condition of bag and cartridge filters. An ElectroDynamic™ sensor is installed in the outlet of each compartment to monitor dust emission levels. The network of sensors is connected to the PLUS ...
-
PremiumManufactured by ENVEAbased in FRANCE
Controller based filter dust leak monitor (0-100%) for filter emissions monitoring after bag houses, cartridge filters, cyclones etc. where performance approvals are not ...
-
PremiumManufactured by ENVEAbased in FRANCE
Stand alone TÜV approved filter dust leak monitor suited to the monitoring of filter emissions (0-100%) after bag houses, cartridge filters, cyclones ...
-
PremiumManufactured by ENVEAbased in FRANCE
Stand alone TÜV approved filter dust monitor suited to the measurement of filter emissions after bag houses, cartridge filters, cyclones ...
-
PremiumManufactured by ENVEAbased in FRANCE
QAL1 Approved ProScatter particulate CEM providing high quality emission measurement of low dust concentrations from dry industrial ...
-
PremiumManufactured by ENVEAbased in FRANCE
The Leak Locate 660 PLUS is a dust emission monitoring system incorporating a digital network and advanced graphics capability. It is designed for use in any processes where filter type arrestment plant are used, eg bag, ceramic and cartridge filters. The system comprises up to 32 networked sensors, a central control unit, user interface with ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you