biogas storage Equipment in Guinea-Bissau

Served | Office inNear
128 Results found
  • Keyword: biogas storage ×

  • Location: Africa ×

  • Location: Guinea-Bissau ×

WesTech - Model DuoSphere™ - Biogas Storage

by WesTech Engineering, Inc.     based in Salt Lake City, UTAH (USA)

Over the years, WesTech has supplied our customers with anaerobic digestion equipment that has added value to their plant operations. WesTech continues to provide valuable solutions with the DuoSphere™ Dual Membrane Gasholder. The DuoSphere™ offers innovative designs for digester gas storage and alternatives for conventional digester ...

CENO - Biogas Roof With Integrated Storage

by SATTLER AG     based in Graz, AUSTRIA

As in the case of a tent, the outer membrane is stretched between the central tower and the tank edge. The tension of the membrane is not created by pulling the membrane over the tank edge, but by using the telescope-like, adjustable tower. This serves to create an even pre-tension of the membrane while saving it in the tank edge area.

Gas Bags

by SATTLER AG     based in Graz, AUSTRIA

Gas bags are the earliest gas storage systems. In most cases gas bags are realised as cylinders or angular cushions. The shape is often determined by the space available. They are mounted in a hanging or horizontal position in existing buildings, rooms or in specially made containers which are for the most part made of steel. In order to measure ...

Gas Storage Membranes

by SATTLER AG     based in Graz, AUSTRIA

SATTLER gas membranes are used in different blank cuts and shapes for different special solutions. Guided internal membranes clamped in the centre of the container are a typical example. Membranes can be adjusted to a variety of container geometries and clamping conditions.

Single-Layer Biogas Roofs Without Storage Function

by SATTLER AG     based in Graz, AUSTRIA

The suitable tank covering without storage for each tank and each working pressure. The outer membrane is leak-proof and bears external loads. In the first place, single-layer, gas-proof tank coverings of biogas plants serve to seal up the tank. Gas has to be accumulated and air must be prevented from entering the tank. External loads are for the ...

SATTLER Double Membrane-Gas Storage - External

by SATTLER AG     based in Graz, AUSTRIA

As in the case of an air hall, air is blown under the outer membrane of the gas storage by a support air blower. Thus, an overpressure is created within the support air space, keeping the form of the outer membrane stable. The ¾ spherical shape allows for high pressures and large volumes on restricted areas. The outer membrane represents ...

Double Membrane-Gas Storage On Tanks

by SATTLER AG     based in Graz, AUSTRIA

Tank covering with integrated gas storage for high pressures and large volumes. Outer shell protecting against climatic conditions – spherical or cylindrical is external loads such as wind, snow and climatic conditions. With the help of clamping rails the outer and inner membranes are clamped to the tank in such a way that they are leak-proof and ...

ennox - Model RAV - Pressure Increase Blower for Digesters and Biogas Reactor

by ennox biogas technology GmbH     based in Hard, AUSTRIA

Digesters and biogas reactors are normally designed and built to cover relatively low system pressures due to cost implications. In order to carry out effective cleaning of the system, operation of a consumer or transfer of the biogas, it is necessary to increase the operating pressure in the pipework.

FARMATIC - Conventional Digesters and Combined Storage

by FARMATIC Anlagenbau GmbH     based in Nortorf, GERMANY

FARMATIC offers conventional digester systems, secondary digesters and combined gas/digestate storage as full equipment package. Our customers are independent project developers, engineering consultancies and biogas research institutions.

3Master - Gasholder

by Biogasmart     based in Gadesco Pieve Delmona, ITALY

Description - Three membrane constant-pressure gasholders are designed to store biogas made from the anaerobic digestion of organic waste and sludge. They are manufactured with biogas resistant polyester reinforced PVC membranes seam welded by high frequency electronic machines. The exclusive 3MASTER system is designed to form an upper air chamber ...

Need help finding the right suppliers?

Let the XPRTs do the work for you