butterfly valves Equipment in Palau

Serving Palau | Near Palau
441 Results found
  • Keyword: butterfly valves ×

  • Location: Australasia ×

  • Location: Palau ×

Model C-Series - Butterfly Valve Wafer Type

by V-Tork Controls     based in Coimbatore, INDIA

V-TORK - 'C' Series soft seated Butterfly valve are single piece dody design with centric disc type and light weight , replaceable & Integrally molded sleeves.Sleeves are designed for longer life and trouble free Performance with 100% leak proof. Integrally molded sleeve design ensures perfect resistance against friction between the disc and ...

Model C-Series - Butterfly Valve Lug Type

by V-Tork Controls     based in Coimbatore, INDIA

V-TORK - 'C'Series soft seated Butterfly valve Lug type, light weight, rigid Construction with replaceable & Integrally molded sleeve. Lug type valves have threaded inserts at both sides of the valve body. This allows them installed into a system using two sets of bolts and no nuts. The valve is installed between two flanges using a separate ...

Butterfly Valves

by Philmac Pty Ltd     based in North Plympton, AUSTRALIA

FIP plastic butterfly valves are a light-weight, corrosion free high performance range offering a full flanged body and an ergonomic hand lever with locking device. FIP's FE and FK Butterfly Valves provide a Flanged, Plastic Butterfly Valve for maximum corrosion resistance for water and chemical transfer

Butterfly Valve

by Kirloskar Brothers Limited (KBL)     based in Pune, INDIA

KBL is pleased to offer top-of- line product in pipeline flow control. Kirloskar wafer and lugged Butterfly valves have been developed with extensive application, design and manufacturing expertise. These products are produced by employing modern manufacturing practices under a robust quality assurance system. These practices ensure consistent ...

Butterfly Valve

by FRANK GMBH     based in Mörfelden-Walldorf, GERMANY

Plastic diaphragm valves of FRANK are high resistant against corrosion and have a very low weight. Such valves are used in water treatment plants as well as in the process- and chemical industry.A wide spectrum of available housing- and sealing material allow a selection of the optimum configuration for the particular application.Now, we also ...

AGS - Model Series W709 - Butterfly Valve

by Victaulic Company     based in Easton, PENNSYLVANIA (USA)

The Series W709 Advanced Groove System (AGS) butterfly valve for 26' -48'/650 - 1200 mm systems is available with handwheel, gear operator, electric, pneumatic or hydraulic actuators. Installs in less than one-third the time of cumbersome multi-bolt wafer, lug type or flanged valves.

Bray McCannalok - Butterfly Valve

by Bray International     based in Houston, TEXAS (USA)

The Bray/McCannalok’s innovative design offers rugged reliability and extremely easy maintenance in the field. Independent and internal tests prove Bray/McCannalok’s superior service life capability, with zero-leakage shut-off. The Bray/McCannalok High Performance Valve delivers the highest quality and highest value available for ...

Model 20/21 Series - Butterfly Valve

by Bray International     based in Houston, TEXAS (USA)

The Series 20/21 butterfly valve not only surpasses the high standards required in sanitary valve applications, and inherent flow characteristics and capabilities. Bray's Series 20 valve is a wafer version with flange locating holes, and the Series 21 is the companion lug version for dead-end service and other flange requirements.

Model 22/23 Series - Butterfly Valve

by Bray International     based in Houston, TEXAS (USA)

Extensive field research and engineering have developed this state-of-the-art design which provides excellent shut off protection (bubble- tight shut off) and high CV values. The Series 22/23 butterfly valve is crafted in a variety of materials such as PTFE, Stainless Steel, UHMWPE and special alloys to fit a wide range of customer requirements. ...

Model Wafer & Lug Type - Butterfly Valve

by Shanghai Karon Valves Machinery Co. Ltd.     based in Shanghai, CHINA

Structural design complies with BS 5155. End connection acc. BS 4504, Section3.2, ANSI B16.1, class 125/150 and DIN 2501 PN10, PN16 and JIS B2210 10K, JIS G5527 7.5K. Operating system can be lever handle, worm gear, pneumatic actuator and electric actuator. Actuator mounting flange acc. ISO 5211. Face to face dimension acc. ISO 5752. Long neck ...

Need help finding the right suppliers?

Let the XPRTs do the work for you