calibrators Equipment

386 Results found
  • Keyword: calibrators ×

Model G-Calibrator - Calibration Gas Generators

by VICI Metronics     based in Poulsbo, WASHINGTON (USA)

G-Calibrators are rugged portable units specifically designed to be used with our patented Series 23 G-Cal permeation devices to generate known concentrations (ppb to ppm) of various gases and liquid vapors. This combination offers the easiest method of calibrating toxic gas detection equipment, gas analyzers, and chromatographs commonly used in ...

Model CAL200 - Precision Acoustic Calibrator

by Larson Davis, a division of PCB Piezotronics     based in Depew, NEW YORK (USA)

The Model CAL200 is a battery operated, temperature compensated precise Class 1 Sound Calibrator for use with microphones. Adaptors allow the calibrator to be used with 1/4 and 3/8' microphones. The following specifications apply: Calibration frequency = 1kHz. Output Sound Pressure Level is selectable from 94 or 114 dB re 20Pa ( 0.2dB).

Model CAL250 - Precision Acoustic Calibrator

by Larson Davis, a division of PCB Piezotronics     based in Depew, NEW YORK (USA)

The Model CAL250 is a battery operated, temperature compensated precise Class 1 Sound Calibrator for use with 1 microphones for the performance measurement and calibration of Sound Level Meters and Dosimeters. Adaptors allow the calibrator to be used with 1/4,1/2 and3/8 microphones. The following specifications apply: - Calibration frequency = ...

Model CAL150 - Precision Acoustic Calibrator

by Larson Davis, a division of PCB Piezotronics     based in Depew, NEW YORK (USA)

IEC 60942 Class 2 Handheld Sound Level Calibrator for ½” microphones at 1000 Hz Used for Sound Level Meters and Noise Dosimeters.

Model CAL291 - Precision Acoustic Calibrator

by Larson Davis, a division of PCB Piezotronics     based in Depew, NEW YORK (USA)

The Model CAL291 is a dual channel Sound Calibrator. It is designed for measuring the residual intensity of sound intensity measurement systems. The following specifications apply: - When used with external signal generators the CAL291 Calibrator shall produce matched dual channel outputs of: ٠Sinusoids; Pink/White BB Noise. ٠1/3 ...

L&J Engineering - Model MCG 2100 - Field Calibrator

by Shand & Jurs (L&J Technologies & L&J Engineering)     based in Hillside, ILLINOIS (USA)

The MCG 2100 is able to communicate with any of the L&J engineering Level Gauges. The calibrator is equipped with the ability to display the level reading, temperature reading and the discrete input status being sent back from the transmitter. This enables the operator to check the conditions of the field wiring and proper operation of the ...

L&J Engineering - Model MCG 2150 - Remote Calibrator

by Shand & Jurs (L&J Technologies & L&J Engineering)     based in Hillside, ILLINOIS (USA)

With the MCG 2150 Remote Calibrator, setup, programming and calibration become a matter of 'remote control.' When used with any of the L&J gauging products (with Infrared Pickup), this compact intrinsically safe wireless unit allows the operator to access, view, and change programming data without ever removing the explosion proof housing. It ...

Nor1251/52/53 Calibrator

by Norsonic AS     based in Lierskogen, NORWAY

Being a class L calibrator ('Laboratory standard' - previous class 0) the Nor1253 is often referred to as the 'electronic pistonphone' since it maintains an accuracy normally associated with a pistonphone without the need for a barometer to make corrections for variations in the ambient pressure. Standard class L/class0 version of the Nor1253 ...

Nor1254 Sound Intensity Calibrator

by Norsonic AS     based in Lierskogen, NORWAY

The sound intensity calibrator Nor1254 is a applicable for residual intensity testing, sound intensity level calibration and particle velocity calibration as specified in EN IEC 61043 Electroacoustics - Instruments for the measurements of sound intensity - Measurements with pairs of pressure sensing microphones. The sound intensity is connected to ...

Model 408 Series - Nitric Oxide Calibration Source

by 2B Technologies     based in Boulder, COLORADO (USA)

The Model 408 Nitric Oxide Calibration Source is a portable source of nitric oxide that allows one to calibrate any nitric oxide monitor.  The instrument scrubs NO from ambient air and produces either zero air or air having a mixing ratio of NO in the range 10-1,000 parts-per-billion by volume (ppbv).  The desired NO concentration is ...

Need help finding the right suppliers?

Let the XPRTs do the work for you