calibrators Equipment in Romania

Serving Romania | Office in RomaniaNear Romania
6380 Results found
  • Keyword: calibrators ×

  • Location: Europe ×

  • Location: Romania ×

Model CAL200 - Precision Acoustic Calibrator

by Larson Davis, a division of PCB Piezotronics     based in Depew, NEW YORK (USA)

The Model CAL200 is a battery operated, temperature compensated precise Class 1 Sound Calibrator for use with microphones. Adaptors allow the calibrator to be used with 1/4 and 3/8' microphones. The following specifications apply: Calibration frequency = 1kHz. Output Sound Pressure Level is selectable from 94 or 114 dB re 20Pa ( 0.2dB).

Model CAL250 - Precision Acoustic Calibrator

by Larson Davis, a division of PCB Piezotronics     based in Depew, NEW YORK (USA)

The Model CAL250 is a battery operated, temperature compensated precise Class 1 Sound Calibrator for use with 1 microphones for the performance measurement and calibration of Sound Level Meters and Dosimeters. Adaptors allow the calibrator to be used with 1/4,1/2 and3/8 microphones. The following specifications apply: - Calibration frequency = ...

Model CAL150 - Precision Acoustic Calibrator

by Larson Davis, a division of PCB Piezotronics     based in Depew, NEW YORK (USA)

IEC 60942 Class 2 Handheld Sound Level Calibrator for ½” microphones at 1000 Hz Used for Sound Level Meters and Noise Dosimeters.

Model CAL291 - Precision Acoustic Calibrator

by Larson Davis, a division of PCB Piezotronics     based in Depew, NEW YORK (USA)

The Model CAL291 is a dual channel Sound Calibrator. It is designed for measuring the residual intensity of sound intensity measurement systems. The following specifications apply: - When used with external signal generators the CAL291 Calibrator shall produce matched dual channel outputs of: ٠Sinusoids; Pink/White BB Noise. ٠1/3 ...

HORIBA - Model APMC-370 - Air Pollution Multigas Calibrator

by HORIBA Europe GmbH     based in Leichlingen, GERMANY

APMC-370 is designed to calibrate gas analyzers manually, remotely controlled or automatically. It is installed in air pollution monitoring stations, in laboratories for quality assurance and also in the production of gas analyzers.

Sitelab - Model PAH Calibration Kit - Product No. CAL-060

by Sitelab Corporation     based in West Newbury, MASSACHUSETTS (USA)

Use with Sitelab's UVF-3100 analyzer. Kit contains ready-to-use calibration standards for testing Total PAHs or Target PAHs. Results will correlate to the sum of 16 PAH compounds reported by U.S. EPA Method 8270 or other laboratory methods using GC instrumentation. Kits are re-usable for 3 months. Available in methanol or hexane solvent. ...

Sitelab - Model TPH-Oil Calibration Kit - Product No. CAL-056

by Sitelab Corporation     based in West Newbury, MASSACHUSETTS (USA)

Use with Sitelab's TD-500D analyzer. Ideal for sites contaminated with crude oil, heavy fuel oil or waste oil. Kit contains ready to use standards available in methanol or hexane solvent. Kits are re-usable for 3 months. Certificate of analysis and MSDS included.

Sitelab - Model GRO Calibration Kit - Product No. CAL-025

by Sitelab Corporation     based in West Newbury, MASSACHUSETTS (USA)

Use with Sitelab's UVF-3100 analyzer. Kit contains ready-to-use calibration standards for testing volatile petroleum hydrocarbons, including BTEX, in the C6 to C10 gasoline range.Results will directly correlate to U.S. EPA Method 8015-GRO or other laboratory methods using GC instrumentation.Kits are re-usable for 3 months. Available in methanol or ...

Brüel & Kjær - Model Type 4231 - Sound Calibrator

by Brüel & Kjær Sound & Vibration Measurement A/S     based in Nærum, DENMARK

A handy, portable sound source for calibration of sound level meters and other sound measurement equipment. The calibrator is very robust and stable, and conforms to EN/IEC 60942 Class LS and Class 1, and ANSI S1.40-1984. For maximum confidence in your measurement results you can quickly compensate for local measurement conditions by calibrating ...

L&J Engineering - Model MCG 2100 - Field Calibrator

by Shand & Jurs (L&J Technologies & L&J Engineering)     based in Hillside, ILLINOIS (USA)

The MCG 2100 is able to communicate with any of the L&J engineering Level Gauges. The calibrator is equipped with the ability to display the level reading, temperature reading and the discrete input status being sent back from the transmitter. This enables the operator to check the conditions of the field wiring and proper operation of the ...

Need help finding the right suppliers?

Let the XPRTs do the work for you