check valves Equipment in Austria

885 Results found
  • Keyword: check valves ×

  • Location: Europe ×

  • Location: Austria ×

Check-valves Series

by FASTER S.p.A.

CHECK VALVES are often used as safety device within hydraulic circuits. Purposely designed to be used when it is necessary for opening a valve at a specific pressure level, check valves are characterized by elastomeric or metal to metal sealing and by a wide range of opening pressures.

Disc Check Valve

by VYC Industrial, s.a.

Disc check valve with centering ring for placing between flanges in accordance with DIN, UNE, ANSI, BS, etc. norms. DN-15 to 100 (DN-125 to 200 see catalogue for Model 172). For liquids, gases and steam. For use in hydraulic, pneumatic, heating and steam systems, chemical and food industries, etc. In accordance with the requirements of directive ...

Cameron - Model 310 Series - Check Valves

by Cameron

The 310 Series is a ductile iron, threaded bonnet, full opening, swing check valve. Threaded bonnet construction allows disassembly on the jobsite for easy service and repair. 310 Series check valves are available in sizes 1” to 4” 600psi to 2000psi maximum working pressures in threaded end connections.

Check Valves

by Schutte & Koerting

Fig. 828 Check Valves, also referred to as Extraction Check Valves, prevent backflow in steam and water lines to protect valuable equipment from damage. Used in extraction lines from steam turbines to feedwater heaters, heating systems or process equipment, these extraction check valves are engineered for exceptional reliability. Where reverse ...

Model Series TF-1 - Check Valves

by Tideflex Technologies

The TF-1 has become the preferred Tideflex configuration for outfalls. Designed for in-structure and end-of-pipe installations, the TF-1 features a flat bottom and flared top. This allows the valve to be installed at a lower overall elevation than other configurations, with less bottom clearance required. This is especially important in low-lying ...

Model Series 35-1 - Check Valves

by Tideflex Technologies

In some applications, a slip-on Tideflex duckbill check valve (TF-1) is not feasible because of an existing mating flange or wall thimble, or a flanged connection is preferred, or it is desired to mount the valve directly to a concrete wall. In these cases, the 35-1 Duckbill Check Valve is the solution.

Model PN10/16 (DN40 – DN300) - Check Valves

by CTV-Armaturen GmbH

Design and specifications acc. to DIN EN 12334.Flange connection acc. to DIN EN 1092-2.Face to face dimension acc. to DIN EN 558, series 48 (F6).Resilient seated.Rubber coated flap of elastomer.100% free flow passage.Low-wear and low-resistance bearing of the flap.Lifting device

Adams - Model SCV - Check Valves

by Adams Valves Inc.

SCV check valves are exclusively installed at the outlet side of steam turbines. These fast closing non-return valves shall protect the turbine from back flow of steam or water which may severely damage the turbine blades. The free swinging SCV design closes by gravity. The disc is designed to provide two times more gravitational closing force ...

Model NV/OV/OF/OD Line - Check Valve


Check valves of the NV/OV line are open cartridges and provide a superior flow performance (reduced head loss). They can only be assembled against the direction of flow but require no retainer («snap-fit» design with flexible tabs).The distinguishing feature between NV and OV lines is the positioning of the outer seal (NV: non-captive ...

Need help finding the right suppliers?

Let the XPRTs do the work for you