check valves Equipment in Spain

Serving Spain | Office in SpainNear Spain
1261 Results found
  • Keyword: check valves ×

  • Location: Europe ×

  • Location: Spain ×

Check Valve

by Bidapro S.L     based in Asteasu, SPAIN

Check Valve tilting disc with eccentric shaft and oblique seating angle, with or without counterweight and cushioning for control of the closing.

Model RT - Check Valve

by FCA - Aplicaciones Para Control De Fluidos S.L.     based in Ibarra, SPAIN

The RT model FCA check valve is a metal seated non return valve, with single disc and cast monoblock body. The level of tightness is high. The seat is integrated in the disc and is oblique, due to this fact allows an easy closing. Additionally, an auxiliary spring can be assembled in order to improve the closing. It is wafer type to be installed ...

Alloy - Check Valves

by The Alloy Valve Stockist     based in Barcelona, SPAIN

Materials: as a valve stockist, we keep duplex, super duplex, alloy 20, monel alloy 400, hastelloy, inconel alloy 600 and incoloy alloy 800, high-tensile strength titanium and tantalum valves in stock, as well as heat resitant 6 Moly, 254 SMO, corrosion resistant 904L, zirconium and uranus valves and can also offer them on manufactuing lead times.

Check Valves

by Vector & Wellheads Engineering S.L     based in Zaragoza, SPAIN

Our check valves design covers all the valve types, as per customer request. We can manufacture the valves with bolted bonnet or pressure-seal design, in order to cover high pressure applications, or threaded bonnet for small valves.

Check Valves

by Ringo Valvulas     based in Zaragoza, SPAIN

Válvula de RetenciónOur check valves cover all different designers required for each service conditions. Check valves can be bolted bonnet, pressure seal bonnet or threaded in bonnet design.

Check Valves

by Ampo Poyam Valves     based in Idiazabal, SPAIN

Check valves are normally used in systems involving rapid and frequent flow reversals, pulsation or when excessively turbulent flow should be avoided. Check valves are used to prevent flow reversal in piping systems. They are suitable for horizontal or vertical (up flow through valve only) piping runs.

Disc Check Valve

by VYC Industrial, s.a.     based in Terrassa, SPAIN

Disc check valve with centering ring for placing between flanges in accordance with DIN, UNE, ANSI, BS, etc. norms. DN-15 to 100 (DN-125 to 200 see catalogue for Model 172). For liquids, gases and steam. For use in hydraulic, pneumatic, heating and steam systems, chemical and food industries, etc. In accordance with the requirements of directive ...

Class - Model VR150BC - 150 - Bolted Cover Check Valves

by JC Fábrica de Válvulas S.A.     based in Sant Boi de Llobregat, SPAIN

Sizes 2'' to 36''. BODY: Carbon steel, Stainless steel, Low temperature carbon steel, Duplex, Special Alloys. Other materials under request. TRIM: 316, 410, MONEL. Other materials under request.

Irua - Swing Check Valves

by Irua Tech Industries, S.L.     based in GALDAKAO, SPAIN

To avoid slam is essential that the counterweight closes the valve before a flow reversal occurs. That Slam is what causes the “Water Hammer” in piping systems.The cushion cylinder cannot retard the valve closure and will minimize the slamming tendency when the valve closes too quickly due to its ...

Irua - Tilting Check Valve

by Irua Tech Industries, S.L.     based in GALDAKAO, SPAIN

Valve allows for one directional flow and prevents the return flow of the liquid to its source

Need help finding the right suppliers?

Let the XPRTs do the work for you