check valves Equipment in Minnesota

1026 Results found
  • Keyword: check valves ×

  • Location: USA ×

  • Location: Minnesota ×

Model 2 psi - Quick-connect with Check Valve

by AgSelect.com

This rugged nozzle body comes with a diaphragm check-valve that has a cracking pressure of 2 psi. Use this nozzle body for applications in buildings without sloped floors. (Use P/N 2320-1922-008 if distribution line will slope more than 12-18 inches from end to end.) It has 1/4' mpt for connection in schedule 80 PVC or steel pipe (1-1/2' id or ...

Cameron - Model 310 Series - Check Valves

by Cameron

The 310 Series is a ductile iron, threaded bonnet, full opening, swing check valve. Threaded bonnet construction allows disassembly on the jobsite for easy service and repair. 310 Series check valves are available in sizes 1” to 4” 600psi to 2000psi maximum working pressures in threaded end connections.

Check Valves

by Schutte & Koerting

Fig. 828 Check Valves, also referred to as Extraction Check Valves, prevent backflow in steam and water lines to protect valuable equipment from damage. Used in extraction lines from steam turbines to feedwater heaters, heating systems or process equipment, these extraction check valves are engineered for exceptional reliability. Where reverse ...

Model CV04-NB - Check Valve

by Comatrol

This valve allows free flow from 1 to 2 and blocks flow from 2 to 1.

Check valves

by Walworth

Check valves are generally used to protect pumps or similar equipment, allowing the flow only in one direction and preventing flow reversal due to back pressure.The swing type check valves are designed to produce a low pressure drop in the pipeline. This design provides a tighht seal as well as a fast reaction to the closure.Design Features.

Check Valves

by ARFLU - Valves Manufacturer

Design : bs 1868 / api 6d / asme b16.34 “swing” check valves from 2” (50 mm) to 60” (1500 mm) nps. Face to face: asme b16.10 Flanged ends: from 2” to 24” s/asme b16.5, bigger than 24” s/asme b16.47. Also mss sp-44 or under request. Welding ends: asme b16.25 Hidroestatic test: api 598 / api 6d or bs 16.34.

Bolted Cover - Model VR150BC - Class 150 - Check Valves

by JC Fábrica de Válvulas S.A.

BODY: Carbon steel, Stainless steel, Low temperature carbon steel, Duplex, Special Alloys,... Other materials under request. TRIM: 316, 410, MONEL,... Other materials under request.

EVDOS - Model MEMBRANE TYPE - Check Valve

by EVDOS SA

Check valve membrane type secures tightness for big working duration , closes quietly and avoids water hammer. Valve closes easily by a membrane with special form and composition.

Need help finding the right suppliers?

Let the XPRTs do the work for you