chemical oxygen demand Equipment in Cape Verde

93 Results found
  • Keyword: chemical oxygen demand ×

  • Location: Africa ×

  • Location: Cape Verde ×


Spectroquant Pharo - Spectrophotometer

by Merck Millipore

Combining the benefits of a system photometer with the versatility of a spectrophotometer, Merck’s new Spectroquant® Pharo 100 and 300 spectrophotometers open up the possibilities for water analysis. Over 150 tests offering different measuring ranges and citation forms from aluminium through COD (Chemical Oxygen Demand) to zinc are ...

4835 D385 - Oxygen Optode

by Aanderaa Data Instruments AS AADI - a Xylem brand

Oxygen Optode 4835 is a compact fully integrated sensor for measuring the O2- concentration in shallow water.

4330/4330F - Oxygen Optode

by Aanderaa Data Instruments AS AADI - a Xylem brand

Oxygen Optode 4330/4330F is a compact fully integrated sensor for measuring the O2-concentration.

3835/4130/4175 - Oxygen Optodes

by Aanderaa Data Instruments AS AADI - a Xylem brand

Oxygen Sensor 3835 Oxygen/Temperature Sensor 4130 Oxygen Sensor w/analog output 4175 are compact fully integrated sensors for measuring the O2-concentration. The 3835 model is designed to be mounted directly on the top-end plate of RCM-9 or RDCP as well as for stand alone operation using SR10 or RS-232 interface. The 4130 model can be connected ...

3830/3930/3975 - Oxygen Optodes

by Aanderaa Data Instruments AS AADI - a Xylem brand

Oxygen Sensor 3830 Oxygen/Temperature Sensor 3930 Oxygen Sensor w/analog output 3975 are compact fully integrated sensors for measuring the O2-concentration. The 3830 model is designed to be mounted directly on the top-end plate of RCM-9/11 or RDCP as well as for stand alone operation using SR10 or RS-232 interface. The 3930 model can be connected ...

SEAGUARD - Dissolved Oxygen O2

by Aanderaa Data Instruments AS AADI - a Xylem brand

The SEAGUARD O2 may be used as a multi-parameter instrument in the sea and in freshwater. Since oxygen is involved in most of the biological and chemical processes in aquatic environments, it is the single most important parameter needed to be measured. Oxygen can also be used as a tracer in oceanographic studies.


BM-T+ - Multi-purpose Respirometer

by SURCIS, S.L.

Bm-Respirometers are laboratory analyzers specially developed, for practical and efficient biological wastewater treatment, management, design, research and training.

SSR 90 (K 60) - Supplied Air Respirators

by MSA AUER GmbH

This chemical oxygen apparatus provides oxygen on demand during gas outbursts, fires and after explosions. Designed especially for self-rescue, the unit is housed in a robust stainless steel case and can be carried along or kept on site. Provides 60 minutes of rescue oxygen and up to 5 hours while awaiting rescue.

The First COD Cell Tests with Unlimited Chloride Tolerance

by Merck Millipore

The chloride dilemma: COD (chemical oxygen demand) measurements are regularly performed to test water for pollutants. But as many analysts know, the task is particularly difficult when the water sample contains very high chloride levels, such as with industrial wastewater or seawater. Standard COD tubes cannot be used, as chloride interferes ...

Spectroquant - Colorimeter Picco COD/CSB

by Merck Millipore

Merck has also complemented the existing capabilities of the Spectroquant® Colorimeter Picco COD/CSB with four ranges that measure chemical oxygen demand (COD): from 10 mg/l up to 10 g/l. These new ranges will benefit industry specialists, particularly those working with waste

Need help finding the right suppliers?

Let the XPRTs do the work for you