coalescers Equipment in Congo, Democratic Republic of the

51 Results found
  • Keyword: coalescers ×

  • Location: Africa ×

  • Location: Congo, Democratic Republic of the ×

Hilcosep Coalescer Separator

by The Hilliard Corporation - Star Systems Filtration Division

The Hilcosep was designed to remove moisture and particulate contamination from steam and gas turbine lube oils. Self-sufficient stand-alone models with reservoir capacity ranging from 2,000 gallons to 12,000+ gallons and portable models as well as custom designs are available.

Kimre Liqui-Nomix - Liquid/Liquid Coalescer Pads

by Kimre, Inc.

Liquid – liquid mixtures must be settled and coalesced before they can be separated. Gravity Settlers or decanters can be either horizontal or vertical vessels designed to continuously settle, coalesce, and withdraw settled liquids. Cyclones and centrifuges have also been used for separating liquid/liquid mixtures by enhancing the settling ...

Coalescer-Separators

by COMO Filtration Systems

COMO designed a line of Coalescer-Separators to remove tramp oil from machine tool coolant, wash water, and other water-based fluid mixtures.

Liquid Coalescers

by Koch-Glitsch Inc

When gravity forces alone do not produce an efficient separation of immiscible fluids, adding a KOCH-OTTO YORK® liquid-liquid coalescer system can improve separation efficiency. High separation efficiency can result in only a few parts per million (ppm) liquid dispersion in the liquid effluent stream. Created using combinations of KOCH-OTTO ...

CLS Series - Coalescer & Separator

by Nuen Process Technologies Inc.

CLS series housing has set the standard for reliability and performance on today’s liquid and gas process application. Our CLS series elements have continued to demonstrate and exceed all expectations in regards to liquid/gas coalescing and separation technologies.

Coalescer/Separator

by VertMarkets

The 35L-CLC Coalescer/Separator is a two-stage, vertical separation vessel designed to separate liquid from gas or vapor. The 35L-CLC Coalescer/Separator is a two-stage, vertical separation vessel designed to separate liquid that exists in the form of a fine mist or fog, as well as solid particles, from a gas or vapor. This system operates in two ...

Fume Coalescer

by Beltran Technologies, Inc.

In many industrial and chemical operations, sub-micron emissions occur at various points in the process. Conventional scrubbers and other mechanical types of collectors depend on kinetic forces and high-energy inputs are required for the efficient collection of particles smaller than about 2 microns. Small particles tend to be more visible because ...

Interceptor-Pak Coalescers

by ACS Industries, LP

ACS has a complete range of Interceptor-Pak coalescing units for high purity liquid liquid separation performance. ACS commonly supplies four styles of  011 wire filament types, five pound, seven pound, nine pound, and twelve pound densities.  These are readily available in 304, 316, Inconel 600, Hastelloy C276, Monel 400 and Nickel 200 ...

Allen Coalescer-Separator

by Allen Filters, Inc.

The Allen Coalescer-Separator system removes free and emulsified water down to the saturation level. The type of oil used, the kinds of additives in the oil, and the temperature of the oil determines the saturation level. For a typical ISO 32 turbine light oil at 100 °F, the saturation level is approximately 150 ppm. The complete ...

Coalescers / Liquid-Liquid

by Begg, Cousland & Co. Ltd

‘Becophase’ Liquid-Liquid Coalescers - For liquid/liquid separations we can offer either, Plate and Knitted Mesh coalescers in a wide range of materials. Depending upon the requirement they can be used solely or in combination to separate a wide range mechanically induced emulsions. Hydrophobic and hydrophilic materials are available ...

Need help finding the right suppliers?

Let the XPRTs do the work for you