coalescing oil-water separator Equipment in Australia

Serving Australia | Office in AustraliaNear Australia
135 Results found
  • Keyword: coalescing oil-water separator ×

  • Location: Australasia ×

  • Location: Australia ×

ZCL - Coalescing Oil/Water Separators

by ZCL Composites Inc.     based in Edmonton, ALBERTA (CANADA)

ZCL uses multiple angle plates that are virtually self cleaning and each tank is designed for easy removal of plate packs for full maintenance. Oil contamination can be reduced to as low as ten parts per million.

PANEL - Model XL - Enhanced Coalescing Oil Water Separator

by Freytech Inc.     based in Miami, FLORIDA (USA)

Enhanced coalescing oil water separator for large oily water flow rates : PANEL XL. Depending on the model selected, each individual panel can handle flow rates of either 320 gallons per minute (GPM) or 640 GPM. Achieves below 5 parts per million (PPM) separation of free non-emulsified oil (below 10 PPM for many types of light crude oil). By far, ...

Alkota - Coalescing Plate Oil-Water Separator

by Alkota Cleaning Systems, Inc.     based in Alcester, SOUTH DAKOTA (USA)

Alkota offers three categories of products to remove contaminants from water: oil/solid coalescing, evaporators and media filtration. The Alkota Coalescing Plate Oil-Water Separator removes free oil and solids from water and produces effluent with less than 10mg/L of oil droplets larger than 20 microns. Our evaporators minimize your expenses by ...

Oil & Solids Separators - Large Designed Systems

by Baldwin Industrial Systems Pty Ltd. (BIS)     based in Cardiff, AUSTRALIA

System performance is simulated through the use of a proprietary computer program. This enables the effluent quality to be accurately predicted which means that we can meet discharge limits 100% of the time – GUARANTEED!

Oil & Solids Separators - Small Packaged Units

by Baldwin Industrial Systems Pty Ltd. (BIS)     based in Cardiff, AUSTRALIA

Efficient Removal of “Free” Oil & Grease, Suspended Solids, Dust etc. Tough and compact. Modular plate pack. Specific design to prevent blocking. Various sizes and configurations. ‘Approved’ by most Australian Authorities. First Flush, storm by-pass configurations. Complete package systems, including Pumps, Level ...

Custom Scrubber Elements

by Solberg Manufacturing, Inc.     based in Itasca, ILLINOIS (USA)

Filter change out differential: 10'-15' in H2O over initial delta P. Pleated filter media. Optimal surface area to flow ratio. Wide range of operation flows. Flat gaskets provide for optimal sealing surface. Electronically continuity throughout filter element. Reinforced steal core capable of withstanding 15 PSID.

Hilliard HILCO Hilcosep - Coalescer Separator

by The Hilliard Corporation - Star Systems Filtration Division     based in Elmira, NEW YORK (USA)

The Hilcosep was designed to remove moisture and particulate contamination from steam and gas turbine lube oils. Self-sufficient stand-alone models with reservoir capacity ranging from 2,000 gallons to 12,000+ gallons and portable models as well as custom designs are available.

Oil/Water Separator for Liquid Separation

by Geotech     based in Leamington Spa, UNITED KINGDOM

The high capacity cost effective low maintenance compact oil water separators utilise a highly efficient coalescing media pack. The separators are fully automatic, involve no moving parts and can be supplied for flows up to 60 lpm.

ESD Waste2Water - Above Ground Solid Separator

by ESD Waste2Water, Inc.     based in Ocala, FLORIDA (USA)

ESD Waste2Water designs and manufactures a full line of Solids Separators and liquid solid separators for a variety of waste water pretreatment applications. The Solids Separators are constructed of marine grade aluminum for effective chemical resistance, strength and durability. The Solids Separators will typically contain welded NPT fittings for ...

EnviroSEP - Oil And Water Separator

by Ovivo (Formerly Eimco Water Technologies)     based in Salt Lake City, UTAH (USA)

Ovivo’s EnviroSEP units provide oil and water separation for a multitude of industrial wastewater, process water pre-treatment and stormwater treatment applications. The unit is designed to remove all free oil from contaminated streams to comply with the most stringent of discharge requirements. Typically, no more than 5mg/l of oil will ...

Related Terms for coalescing oil-water separator

Need help finding the right suppliers?

Let the XPRTs do the work for you