coalescing oil-water separator Equipment in Uganda

Serving Uganda | Near Uganda
135 Results found
  • Keyword: coalescing oil-water separator ×

  • Location: Africa ×

  • Location: Uganda ×

ZCL - Coalescing Oil/Water Separators

by ZCL Composites Inc.     based in Edmonton, ALBERTA (CANADA)

ZCL uses multiple angle plates that are virtually self cleaning and each tank is designed for easy removal of plate packs for full maintenance. Oil contamination can be reduced to as low as ten parts per million.

PANEL - Model XL - Enhanced Coalescing Oil Water Separator

by Freytech Inc.     based in Miami, FLORIDA (USA)

Enhanced coalescing oil water separator for large oily water flow rates : PANEL XL. Depending on the model selected, each individual panel can handle flow rates of either 320 gallons per minute (GPM) or 640 GPM. Achieves below 5 parts per million (PPM) separation of free non-emulsified oil (below 10 PPM for many types of light crude oil). By far, ...

Alkota - Coalescing Plate Oil-Water Separator

by Alkota Cleaning Systems, Inc.     based in Alcester, SOUTH DAKOTA (USA)

Alkota offers three categories of products to remove contaminants from water: oil/solid coalescing, evaporators and media filtration. The Alkota Coalescing Plate Oil-Water Separator removes free oil and solids from water and produces effluent with less than 10mg/L of oil droplets larger than 20 microns. Our evaporators minimize your expenses by ...

Hilliard HILCO Hilcosep - Coalescer Separator

by The Hilliard Corporation - Star Systems Filtration Division     based in Elmira, NEW YORK (USA)

The Hilcosep was designed to remove moisture and particulate contamination from steam and gas turbine lube oils. Self-sufficient stand-alone models with reservoir capacity ranging from 2,000 gallons to 12,000+ gallons and portable models as well as custom designs are available.

Oil/Water Separator for Liquid Separation

by Geotech     based in Leamington Spa, UNITED KINGDOM

The high capacity cost effective low maintenance compact oil water separators utilise a highly efficient coalescing media pack. The separators are fully automatic, involve no moving parts and can be supplied for flows up to 60 lpm.

EnviroSEP - Oil And Water Separator

by Ovivo (Formerly Eimco Water Technologies)     based in Salt Lake City, UTAH (USA)

Ovivo’s EnviroSEP units provide oil and water separation for a multitude of industrial wastewater, process water pre-treatment and stormwater treatment applications. The unit is designed to remove all free oil from contaminated streams to comply with the most stringent of discharge requirements. Typically, no more than 5mg/l of oil will ...

AWAS - Model Galaxie 1902 / 2002 - Oil-Water Vortex Separator

by AWAS International GmbH     based in Wilnsdorf, GERMANY

Oil-Water separation acc. to the vortex principle for industrial effluents with oil and grease. (successfully tested and type approved ac. To EN858 class I with less than 5 ppm residual oil) AWAS offers for the first time a flexible solution to suit individual applications - non clogging - no coalescence filter material - no corrugated plates - ...

AWAS - Model Galaxie Tower - Oil-Sludge-Separator/Coalescence Separator

by AWAS International GmbH     based in Wilnsdorf, GERMANY

The 3 stage separator for industrial use. The vortex separator AWAS Galaxie Tower combines the classic oil separator, coalescence separator and sludge trap. This solution is for maximum efficiency, safety and saving space – all in one component. Attention: oils will be automatically unloaded, as well as sludge. The compact design provides ...

AWAS - Model Galaxie 2002 - Tower Separates Oil and Sludge

by AWAS International GmbH     based in Wilnsdorf, GERMANY

The AWAS Galaxie Tower separates oil and sludge at the same time. Surface oil will be collected via a patented removal system in an oil tank. Sludge and particles will quickly settle at the bottom, from where they can easily be disposed.

Model GDS - Gravidynamic Separators

by NPO Dekanter, LLC     based in Domodedovo, RUSSIA

Gravidynamic separators are designed for separation of two liquids that have different density and that are present as emulsions. Usually they are used for separation of hydrocarbon mixtures or plant oils with water. Main fields of implementation are purification of discharged waters form oils and oil products; regeneration of washing and ...

Related Terms for coalescing oil-water separator

Need help finding the right suppliers?

Let the XPRTs do the work for you