direct push Equipment in Yukon

Served | Office inNear
191 Results found
  • Keyword: direct push ×

  • Location: Canada ×

  • Location: Yukon ×

Standpipe Piezometer - Model 601 - PVC Well Points

by Solinst Canada Ltd.     based in Georgetown, ONTARIO (CANADA)

Standpipe Piezometers are designed to be placed within a drilled hole to provide a filtered inlet point. Pointed PVC tip is also suitable for pushing into very loose sands at the base of a borehole, a stream, or into very loose tailings pond sediments. Excellent for metals sampling, water level monitoring, permeability measurements, de-watering ...

The Drive-Point Profiler - Model 660 - Accurate Site Characterization and Site Assessment Profiling Tool

by Solinst Canada Ltd.     based in Georgetown, ONTARIO (CANADA)

The Model 660 Profiler is designed to collect samples from multiple points in a single drive/drilling location, at discrete zones. It allows contaminant vs. depth profiling and detailed plume delineation. The profiler has a 1.75' (45 cm) dia. AW stainless steel tip with one row of screened inlet holes set circumferentially; holes lead to single ...

Geoprobe - Model 6620DT - Direct Push Unit

by S2C2 Inc.     based in Raritan, NEW JERSEY (USA)

Geoprobe 6620DT track unit offers 35,000lbs of down force and 47,000lbs of retraction force in a unit that is track mounted and only 60' wide. Height requirements for the 6620DT are 153', making the 6620DT extremely useful for accessing limited access areas without giving up the ability to drive the larger tooling to deeper depths. This unit ...

Geoprobe - Model 6600 - Direct Push Unit

by S2C2 Inc.     based in Raritan, NEW JERSEY (USA)

Geoprobe 6600 truck unit offers 35,000lbs of down force and 47,000lbs of retraction force in a unit mounted within a PC-111 box on a F-550 4X4 truck. This unit offers the power of the Geoprobe 6000 series units with a large amount of storage for supplies, pumps etc. This unit pushed a MIP probe to 100' on September 29th 2010.

Geoprobe - Model 5410 - Direct Push Unit

by S2C2 Inc.     based in Raritan, NEW JERSEY (USA)

Geoprobe 5410 truck unit offers over 21,000lbs of down force and 28,000lbs of retraction force in a unit mounted within an enclosed box on a Dodge 3500 4X4 truck. This unit is typically used for shallow soil and groundwater sampling.

Geoprobe - Model 7822DT - Direct Push Unit

by S2C2 Inc.     based in Raritan, NEW JERSEY (USA)

Geoprobe 7822DT track unit offers 36,000lbs of down force and 48,000lbs of retraction force in a unit that is track mounted and only 60' wide. The rig is capable of advancing 2.25' and 3.25' tooling to greater depths and has much improved auger capabilities. Overall the 7822DT has approximately 30% more power than the 6000 series units. Height ...

Drive-Point Piezometers - Model 615 - Direct Push Well Points

by Solinst Canada Ltd.     based in Georgetown, ONTARIO (CANADA)

Solinst Drive-Point Piezometers make ideal permanent or temporary, inexpensive wells to monitor groundwater, soil and gas. While costs are kept low, sample integrity is maintained. The piezometer tip and screen are stainless steel to obtain high quality samples, and a barbed fitting allows a sample tube to be attached. Easily install using a ...

Model 7822DT - Geoprobe Unit

by Rig Source, Inc. (RSI)     based in Elburn, ILLINOIS (USA)

78 inch (1,981 mm) probe cylinder stroke48,000 lb (214kN) pullbackNew GH64 Hammer with Modular Percussion Power Cell and integrated two-speed, bi-directional rotationGA 4000 AugerheadRedesigned control panelPowered by a four-cylinder, 57 Hp, liquid-cooled Tier 3 compliant Kubota turbo diesel engine

Model 6620DT - Probe Cylinder Stroke

by Rig Source, Inc. (RSI)     based in Elburn, ILLINOIS (USA)

66 in. (1676 mm) probe cylinder stroke allows use of 60 in. (1,524 mm) probe rodsOver 20 ton pulling capacity for today's larger sampling tools and deeper depthsEquipped with the powerful GH62 hammerHeavy Duty Undercarriage has a wider track that carries more weight, adds more torque, reduces ground pressure and handles greater tool weightWireless ...

Model 6622CPT - DI Platform Machine

by Geoprobe Systems     based in Salina, KANSAS (USA)

The compactness of the machine and its light weight make it convenient to mobilize to project sites. Larger pads on outriggers provide increased support when pulling tools in soft conditions. The newly designed, easy-to-use control panel gives the operator timely useful feedback.

Need help finding the right suppliers?

Let the XPRTs do the work for you