Topics

Sections

DNAPLs Equipment in Quebec

34 Results found
Order by:
Recommended | 
Alphabetical

2” DNAPL Recovery Pump

by Xitech Instruments, Inc.

This 2” Smart Pump was designed to recover low viscosity DNAPLs like TCE. The 2” Smart Pump is completely resistant to all solvents, easily fits into a 2” schedule 40 well or larger, has a pumping rate up to 12 GPH, operating well depth of 200 feet, and requires no above ground controls to operate. Maximum air requirements are .5 CFM @ 125 PSIG, ...

4” DNAPL Recovery Pump

by Xitech Instruments, Inc.

This 4” Smart Pump was designed to recover high viscosity DNAPLs like Coal-Tar. The 4” Smart Pump is completely resistant to all solvents, easily fits into any 4” well or larger, has a pumping rate up to 60 GPH, operating well depth of 200 feet, and requires no above ground controls to operate. The maximum air requirements are .5 CFM @ 125 PSIG, ...

Emulsified Zero-Valent Iron (EZVI) - In-Situ DNAPL Remediation

by TEA, Inc.

EZVI is an emulsion of powdered zero-valent iron, surfactant, oil, and water that reductively dehalogenates halogenated hydrocarbons (e.g. PCE, TCE, CFC, VC). Because EZVI uses an emulsion to deliver reactive iron, it has the ability to mix with DNAPLs present in the subsurface environment. Thus, EZVI is a 'source area remediation' technology.

EZVI - Emulsified Zero Valent Iron In-Situ DNAPL Remediation

by RemQuest

EZVI is an emulsion of zero-valent iron, surfactant, oil, and water that reductively dehalogenates halogenated hydrocarbons (e.g. PCE, TCE, CFC, VC). Because EZVI uses an emulsion to deliver reactive iron, it has the ability to mix with DNAPLs present in the subsurface. Thus EZVI is a “source area' remediation technology.

Olio-D-Sep™ - Oil/Water Separators for LNAPL & DNAPL

by Environmental Remediation Equipment Inc. (ERE)

The ER-DN-SS Coalescing Oil/Water/DNAPL Separator will remove DNAPL contaminant and all non-emulsified oil from waste water that has a minimum of suspended solids.

Hydrasep - RCT DNAPL Model Separators

by Hydrasep, Inc.

RCT DNAPL models are specifically designed for the treatment of process water or groundwater where the oils and other contaminants are heavier than water or for the removal of water & solids upon vegetable or petroleum based oils.

Emulsified Zero-Valent Iron (EZVI)

by Carus Corporation

EZVI is a surfactant-stabilized, biodegradable emulsion that forms emulsion droplets consisting of an oil-liquid membrane surrounding zero-valent iron (ZVI) particles in water. EZVI capitalizes on the ability of food-grade surfactant, biodegradable vegetable oil, water, and zero-valent Iron to form hydrophobic emulsion droplets (micelles) that ...

Spill Buddy - Compact Skimming System

by Clean Earth Technology, Inc.

The Spill Buddy is a compact, manual, free product skimming system, designed to operate on site to skim quantities of product (LNAPL or DNAPL). The Spill Buddy’s operation is based on the state-of-the-art ALPHA-ARRAY™ sensors in the probe that detect the interface between the product and the water. An audible feedback signals the user ...

High Viscosity Magnum Spill Buster

by Clean Earth Technology, Inc.

Clean Earth Technology’s newest product is a turnkey automatic recovery system that efficiently removes free-phase LNAPLS and DNAPLS as thick as #6 oils from underground aquifers while leaving the water behind.

API Series - API Oil Water Separator

by Pan America Environmental

API oil water separators are passive, physical separation systems designed for removal of oils, fuels, hydraulic fluids, LNAPL and DNAPL products from water. The API Series steel gravity Oil/Water Separators are designed per American Petroleum Institute (API) standards for above and below grade applications. API Oil/Water Separators are designed ...


Air & ClimateEnergy & RenewablesEnvironmental ManagementHealth & SafetyMonitoring & TestingSoil & GroundwaterWaste & RecyclingWater & Wastewater