dnapls Equipment in Arkansas

44 Results found

GCW-DNAPL

by IEG Technologie GmbH

With a GCW it is possible to remove non-miscible liquids of higher density than water (DNAPL) from an aquifer. In order to remove dense non aqueous phase liquids (DNAPL) that have accumulated on the bottom of the aquifer, the GCW is operated in standard mode. The DNAPL is removed by means of a sensor-controlled, pneumatically-driven ...

Hydrasep - RCT DNAPL Model Separators

by Hydrasep, Inc.

RCT DNAPL models are specifically designed for the treatment of process water or groundwater where the oils and other contaminants are heavier than water or for the removal of water & solids upon vegetable or petroleum based oils.

Xitech - 4 - DNAPL / Total Fluids Pump

by Geotechnical Services, Inc

Xitech Total Fluids pumps are designed for DNAPL recovery. Using a compressor or bottled air these pumps efficiently bring your sinking product up to your collection tank. Controllers and solar systems are available for remote locations and automatic shutoff for full tanks. If you have a well with sinking product, this is the recovery pump for ...

Olio-D-Sep™ - Oil/Water Separators for LNAPL & DNAPL

by Environmental Remediation Equipment Inc. (ERE)

The ER-DN-SS Coalescing Oil/Water/DNAPL Separator will remove DNAPL contaminant and all non-emulsified oil from waste water that has a minimum of suspended solids.

Emulsified Zero-Valent Iron (EZVI)

by Carus Corporation

EZVI is a surfactant-stabilized, biodegradable emulsion that forms emulsion droplets consisting of an oil-liquid membrane surrounding zero-valent iron (ZVI) particles in water. EZVI capitalizes on the ability of food-grade surfactant, biodegradable vegetable oil, water, and zero-valent Iron to form hydrophobic emulsion droplets (micelles) that ...

EZVI - Emulsified Zero Valent Iron In-Situ DNAPL Remediation

by RemQuest

EZVI is an emulsion of zero-valent iron, surfactant, oil, and water that reductively dehalogenates halogenated hydrocarbons (e.g. PCE, TCE, CFC, VC). Because EZVI uses an emulsion to deliver reactive iron, it has the ability to mix with DNAPLs present in the subsurface. Thus EZVI is a “source area' remediation technology.

Emulsified Zero-Valent Iron (EZVI) - In-Situ DNAPL Remediation

by TEA, Inc.

EZVI is an emulsion of powdered zero-valent iron, surfactant, oil, and water that reductively dehalogenates halogenated hydrocarbons (e.g. PCE, TCE, CFC, VC). Because EZVI uses an emulsion to deliver reactive iron, it has the ability to mix with DNAPLs present in the subsurface environment. Thus, EZVI is a 'source area remediation' technology.

Solinst - Model 122 - Oil/Water Interface Meter

by Argus-Hazco

The Solinst Model 122 Interface Meters are used to detect and measure level and thickness of both LNAPL and DNAPL hydrocarbon layers in wells and tanks. Product is indicated by a steady tone and light. Water is indicated by intermittent signals. Depth is read directly off the flat, polyethylene tape, which is permanently embossed in feet, 10ths, ...

Hydrogen Release Compound [eXtended] (HRC-X)

by REGENESIS

HRC-X is a controlled release, electron donor material, that when hydrated is specifically designed to produce an extended, controlled release of lactic acid. The newly available lactic acid is critical for the production of hydrogen to fuel anaerobic biodegradation processes in soil and groundwater. HRC-X contains more lactic acid than HRC and is ...

Interface Meter for Oil, Water and Foam Detection

by Geotech

ATEX certified interface meter with LNAP and DNAPL detection for monitoring in landfill, remediation and petrochemical industries.

Need help finding the right suppliers?

Let the XPRTs do the work for you