emissions monitoring Equipment in Niger

Serving Niger | Near Niger
1524 Results found
  • Keyword: emissions monitoring ×

  • Location: Africa ×

  • Location: Niger ×


Model GCEM4000 - Multi-Channel In-Situ Flue Gas Analyser

by Codel International Ltd     based in Bakewell, UNITED KINGDOM

The GCEM4000 is a multi-channel flue gas analyser that uses Non-Dispersive Infrared Absorption (NDIR) technology. It provides high accuracy, low maintenance measurement of all the key combustion process emissions to atmosphere. It is capable of operating in very high dust loading conditions, up to several gm/m3 of dust. Its performance can be ...

Sierra - Model BG-3 Elite - High Performance Partial Flow Dilution System

by Sierra Instruments, Inc.     based in Monterey, CALIFORNIA (USA)

In use since 2004, BG3 PFD (Partial Flow Dilution) technology effectively performs engine research and development to accurately sample exhaust PM (Particulate Matter) emissions over both steady state and transient test cycles (Read Case Study). On January 7, 2011, PFD was signed into law and is now included in the United States Federal Register ...

Model VCEM5100 - Flue Gas Flow Monitor

by Codel International Ltd     based in Bakewell, UNITED KINGDOM

Continuous on-line analysis often only considers the density of the emissions (e.g mg/Nm3) In order to obtain a measurement of total emissions for pollution monitoring (e.g kg/hr) it is necessary to either calculate or measure flow within the gas stream. The VCEM5100 provides non-contact measurement of gas velocity using a time-delay correlation ...

Model VCEM5000 - Flue Gas Flow Monitor

by Codel International Ltd     based in Bakewell, UNITED KINGDOM

Continuous emission monitoring often only considers the density of the emissions (e.g mg/Nm3) In order to obtain a measurement of total emissions for pollution monitoring (e.g kg/hr) it is necessary to either calculate or measure flow within the gas stream. The VCEM5000 provides non-contact measurement of gas velocity using a time-delay ...

Model DCEM2100 - Dual Pass Opacity / Dust Monitor

by Codel International Ltd     based in Bakewell, UNITED KINGDOM

The DCEM2100 is a dual-pass transmissometer configured for the continuous measurement of opacity and dust concentration in flue gases. Its unique optical arrangement provides continuous measurements of transmissivity of visible light across the stack in opposite directions, providing not only an accurate average of the dust loading in the stack, ...

Model DCEM2000 - Dual Pass Opacity / Dust Monitor

by Codel International Ltd     based in Bakewell, UNITED KINGDOM

The DCEM2000 is a dual-pass transmissometer configured for the continuous measurement of opacity and dust concentration in flue gases. Its unique optical arrangement provides continuous measurements of transmissivity of visible light across the stack in opposite directions, providing not only an accurate average of the dust loading in the stack, ...


Gasmet - Model CEMS II - Continuous Emissions Monitoring System

by Gasmet Technologies Oy     based in Helsinki, FINLAND

Gasmet CEMS is a modular construction that typically comprises of Gasmet CX4000 FTIR gas analyzer, heated sampling unit, industrial PC and a Zirconia oxygen analyzer which are installed in an air-conditioned cabin. All modules are 19' rack mounted in pull-out shelves for easy accessibility & service. Gasmet CX4000 FTIR gas analyzer allows the ...

Model GCEM4100 - Multi Channel Extractive Flue Gas Analyser

by Codel International Ltd     based in Bakewell, UNITED KINGDOM

The GCEM4100 is a hot extractive analyser for difficult flue gas monitoring applications. It uses infrared absorption spectroscopy to measure up to seven pollutant species in a single self-contained unit. Many conventional extractive systems require the sampled gas to be cleaned and dried to a very high standard prior to analysis, invariably ...

Soot-Trak - Real-Time Diesel Soot Mass

by Sierra Instruments, Inc.     based in Monterey, CALIFORNIA (USA)

The Sierra Instruments Soot-Trak laser measures real-time engine soot particle mass emissions and performs characterization of soot particle particle size, primary particle surface area and number. Soot-Trak provides researchers and engine developers the accurate information they require about particle transport. With measurement accuracy of 5% ...

Model GCEM40 Series - In-situ Flue Gas Analyser

by Codel International Ltd     based in Bakewell, UNITED KINGDOM

The GCEM40 series is our latest generation of in-situ gas analysers. Designed for use primarily on combustion processes the analysers measure the key pollutants such as CO, NO, NO2, NOx, SO2, CH4, HCl, CO2 and H2O.

Need help finding the right suppliers?

Let the XPRTs do the work for you