emissions monitoring Equipment in Seychelles

1007 Results found
  • Keyword: emissions monitoring ×

  • Location: Africa ×

  • Location: Seychelles ×


DynOptic - DSL-240 MkIII - Single Pass Dust Monitor For Monitoring Dust Emissions using DDP

by DynOptic Systems Ltd

The DSL-240 Dust Monitor is an optical instrument designed to measure the concentration of dust or particulate matter in the exhaust gas passing through a duct, stack or flue.The DSL-240 uses the innovative Dynamic Detection Principle (DDP) in which a light beam emitted from the Transmitter passes across the stack to the Receiver, which measures ...

Procal - 5000 - UV Emissions Analyser

by Procal

Procal 5000 is an ultra-violet (UV), continuous emission monitoring analyser, designed for in situ analysis of gas-phase emission components. Using absorption spectroscopy, Procal 5000 stores and analyses the full UV spectrum and calculates the gas emission concentrations. A typical system comprises an in situ analyser, an integral calibration ...


Boreal Laser - GasFinder2 - Open Path Gas Monitor

by Boreal Laser Inc.

GasFinder2 is a portable, battery-powered open path gas monitor providing one second response and broad dynamic range. Permanently calibrated, GasFinder2 is a small and light (less than 5kg) hand held solution. GasFinder2 response does not depend on path length, so a series of paths of different lengths (between 1m and 1000m) can be measured in ...

Integrated Emissions & Monitoring Systems

by Procal

To comply with the specification of many CEMS it is necessary to monitor and report, not only the gas emissions, but also properties such as particulates or opacity. In addition to generating reports in formats acceptable to environmental agencies, it is often necessary to monitor Oxygen and Velocity. The Procal solution enables this data to be ...

VCEM5100 - Flue Gas Flow Monitor

by Codel International Ltd

Continuous on-line analysis often only considers the density of the emissions (e.g mg/Nm3) In order to obtain a measurement of total emissions for pollution monitoring (e.g kg/hr) it is necessary to either calculate or measure flow within the gas stream. The VCEM5100 provides non-contact measurement of gas velocity using a time-delay correlation ...


TOXcontrol - On-line Biomonitor System (toxicity monitor)

by microLAN On-line Biomonitoring Systems

TOXcontrol Biomonitor: The TOXcontrol is a toxicity monitor and is ideally used to give additional information on water quality. This completely automated system uses freshly cultivated light emitting bacteria (Vibrio fischeri) as a biological sensor. The luminescence is measured before and after exposition to calculate the inhibition in percent.

VCEM5000 - Flue Gas Flow Monitor

by Codel International Ltd

Continuous emission monitoring often only considers the density of the emissions (e.g mg/Nm3) In order to obtain a measurement of total emissions for pollution monitoring (e.g kg/hr) it is necessary to either calculate or measure flow within the gas stream. The VCEM5000 provides non-contact measurement of gas velocity using a time-delay ...

Lancom - 4 - Portable Combustion and Emissions Analyser

by Land Instruments International

The NEW Lancom 4 is a Portable Gas Analyser for industrial applications. Its compact design ensures ease-of-use on site for combustion efficiency and emissions monitoring measurements in all boiler system and pollutant gas processes. Building on the success of the Lancom III, the new Lancom 4 represents the next generation of portable gas analyser ...

DynOptic - SM-202M - Smoke Opacity Monitor for Monitoring Marine Emissions

by DynOptic Systems Ltd

With Port Authorities around the world increasingly regulating emissions from ships, the SM-202M Smoke Opacity Monitor is an optical instrument specifically designed to measure the visible opacity of smoke emissions within the marine industry.The SM-202M uses the single pass light transmission measurement technique, with Transmitter/Receiver ...

SmartCEM - Continuous Monitoring of Flue Gas Emissions

by Codel International Ltd

SmartCEM is the ultimate solution for continuous monitoring of flue gas emissions. It is a fully integrated monitoring concept from the basic analysers and their calibration verification packages through to digital communications, data logging and automatic reporting.

Need help finding the right suppliers?

Let the XPRTs do the work for you