emissions monitoring Equipment in Ukraine

Served | Office inNear
1449 Results found
  • Keyword: emissions monitoring ×

  • Location: Europe ×

  • Location: Ukraine ×

Model O2000 - Oxygen Monitor

by Opsis AB     based in Furulund, SWEDEN

The Opsis oxygen analyser is designed for measuring oxygen in industrial, process and CEM applications. Since the oxygen analyser measures the oxygen contents in the flue gas in situ, there is no need for sample extraction systems.

Soot-Trak - Real-Time Diesel Soot Mass

by Sierra Instruments, Inc.     based in Monterey, CALIFORNIA (USA)

The Sierra Instruments Soot-Trak laser measures real-time engine soot particle mass emissions and performs characterization of soot particle particle size, primary particle surface area and number. Soot-Trak provides researchers and engine developers the accurate information they require about particle transport. With measurement accuracy of 5% ...

Waste Incineration Directive (2000/76/EC)

by Dr. Födisch Umweltmesstechnik AG     based in Markranstädt, GERMANY

In order to analyse the gaseous components a partial gas stream is withdrawn by the sampling probe and led to the analyser cabinet via measuring gas pipe and pump. The measuring gas is tempered at 185 °C and monitored for its flow and temperature.

Gröger - Model GO-BGM Series - Biogas Monitor

by Gröger & Obst Vertriebs- und Service GmbH     based in Wolfratshausen, GERMANY

Sample gas processing and analysis in a compact unit – the ideal solution for many monitoring tasks.

Model VCEM5100 - Flue Gas Flow Monitor

by Codel International Ltd     based in Bakewell, UNITED KINGDOM

Continuous on-line analysis often only considers the density of the emissions (e.g mg/Nm3) In order to obtain a measurement of total emissions for pollution monitoring (e.g kg/hr) it is necessary to either calculate or measure flow within the gas stream. The VCEM5100 provides non-contact measurement of gas velocity using a time-delay correlation ...

Land - Model 4200 - Non-Compliance Dust Emissions Monitor

by Land Instruments International     based in Dronfield, UNITED KINGDOM

The Model 4200 is a compact smoke, dust and particulate monitor for measuring dust emission concentrations on industrial processes and non-compliance applications. This dust monitor is ideally suited to multiprocess plants with common exhaust stacks.

ETG - Model SCRM 110 - Emission Monitoring System

by ETG Risorse e Tecnologia     based in Montiglio, ITALY

One of industrial systems to reduce the emission of hydrochloric acid is the use of the wet scrubber. In counterflow to the exhaust gases is counterbalanced by a flow of water that will react with the HCl in the gas phase by reducing or eliminating the emission into the air of this dangerous gas. To verify the efficiency of the wet scrubber is ...

PCME - Model STACK 980 - Particulate Continuous Emission Monitor

by PCME Ltd     based in St Ives, UNITED KINGDOM

The PCME STACK 980 is an approved Particulate Continuous Emission Monitor suited to industrial applications in stacks after bag filters, cartridge filters, cyclones and process driers. The instrument combines the latest regulatory approvals (MCERTS Performance Standards for Automated Dust Arrestment-Plant Monitors, version 1 (August 2010), class 2 ...

Teledyne - Model ML675 - Dilution-Extractive System

by Teledyne Monitor Labs, Inc.     based in Englewood, COLORADO (USA)

The Teledyne ML675 dilution-extractive system can be used in 40CFR75, 40CFR60, and process control applications. In this system, sample is prepared for analysis by diluting stack gas with clean, dry instrument air at the probe location. Since no moisture is removed with dilution, measurements for SO2, NOx, CO, THC and CO2 are made on a wet basis.

Model SM8200 - SO2/NO In Situ Multi-Gas Analyzer

by Teledyne Monitor Labs, Inc.     based in Englewood, COLORADO (USA)

The transceiver houses the light source, spectrometer, multi-gas photodiode array detector system and various focusing optics for outstanding performance over a significant range of operating conditions.  The transceiver is constructed of a rugged cast aluminum housing which is latch-detachable from the probe assembly for easy removal and ...

Need help finding the right suppliers?

Let the XPRTs do the work for you