emissions monitoring Equipment in Utah

1370 Results found
  • Keyword: emissions monitoring ×

  • Location: USA ×

  • Location: Utah ×


DynOptic - DSL-460 MkII - Double Pass Opacity Monitor for Monitoring Opacity and Particulate Emissions

by DynOptic Systems Ltd

The DSL-460 Opacity Monitor is an optical instrument designed to measure the visual opacity and/or concentration of dust or particulate matter in an exhaust gas passing through a duct, stack or flue.The DSL-460 uses the double pass light transmission measurement technique, with a folded beam Transceiver/Reflector arrangement. A light beam emitted ...


PCME - STACK 181 WS - Particulate Measurement Systems

by PCME Ltd

The PCME STACK 181 WS is suitable for measuring particulate emissions from wet scrubbers and other processes where the flue gas falls below dew point (cold stack conditions) or water droplets are present. The extractive instrument takes a representative continuous sample from the stack, heats this well above dew point to evaporate water droplets ...

Procal - 5000 - UV Emissions Analyser

by Procal

Procal 5000 is an ultra-violet (UV), continuous emission monitoring analyser, designed for in situ analysis of gas-phase emission components. Using absorption spectroscopy, Procal 5000 stores and analyses the full UV spectrum and calculates the gas emission concentrations. A typical system comprises an in situ analyser, an integral calibration ...

Corrosion Monitor

by Reaction Engineering International

REI, in collaboration with Corrosion Management (Manchester, UK), has developed and tested an advanced corrosion monitoring technology for application to high temperature combustion environments. This technology provides immediate response, high sensitivity, and the potential for quantitative corrosion measurements over a range of conditions. For ...

PCME - STACK 980 - Particulate Continuous Emission Monitor

by PCME Ltd

The PCME STACK 980 is an approved Particulate Continuous Emission Monitor suited to industrial applications in stacks after bag filters, cartridge filters, cyclones and process driers. The instrument combines the latest regulatory approvals (MCERTS Performance Standards for Automated Dust Arrestment-Plant Monitors, version 1 (August 2010), class 2 ...

VCEM5100 - Flue Gas Flow Monitor

by Codel International Ltd

Continuous on-line analysis often only considers the density of the emissions (e.g mg/Nm3) In order to obtain a measurement of total emissions for pollution monitoring (e.g kg/hr) it is necessary to either calculate or measure flow within the gas stream. The VCEM5100 provides non-contact measurement of gas velocity using a time-delay correlation ...


LaserGas - II - Single Path Monitor for In-Situ Measurement in Stacks

by Neo Monitors AS

Single Path Monitors are designed for in-situ measurement in stacks, ducts, or reactors with typical path lengths in the range 0.5 to 20 meters. By-pass and extractive configurations are also possible. The monitors’ compact design comprises the transmitter unit with laser module; collimating optics, and main electronics and the receiver unit ...

Integrated Emissions & Monitoring Systems

by Procal

To comply with the specification of many CEMS it is necessary to monitor and report, not only the gas emissions, but also properties such as particulates or opacity. In addition to generating reports in formats acceptable to environmental agencies, it is often necessary to monitor Oxygen and Velocity. The Procal solution enables this data to be ...

VCEM5000 - Flue Gas Flow Monitor

by Codel International Ltd

Continuous emission monitoring often only considers the density of the emissions (e.g mg/Nm3) In order to obtain a measurement of total emissions for pollution monitoring (e.g kg/hr) it is necessary to either calculate or measure flow within the gas stream. The VCEM5000 provides non-contact measurement of gas velocity using a time-delay ...

Land - 4200 - Non-Compliance Dust Emissions Monitor

by Land Instruments International

The Model 4200 is a compact smoke, dust and particulate monitor for measuring dust emission concentrations on industrial processes and non-compliance applications. This dust monitor is ideally suited to multiprocess plants with common exhaust stacks.

Need help finding the right suppliers?

Let the XPRTs do the work for you