emissions monitoring Equipment in Virgin Islands

Serving Virgin Islands | Office in Virgin IslandsNear Virgin Islands
1442 Results found
  • Keyword: emissions monitoring ×

  • Location: Latin America ×

  • Location: Virgin Islands ×

Model VCEM5100 - Flue Gas Flow Monitor

by Codel International Ltd     based in Bakewell, UNITED KINGDOM

Continuous on-line analysis often only considers the density of the emissions (e.g mg/Nm3) In order to obtain a measurement of total emissions for pollution monitoring (e.g kg/hr) it is necessary to either calculate or measure flow within the gas stream. The VCEM5100 provides non-contact measurement of gas velocity using a time-delay correlation ...

Model VCEM5000 - Flue Gas Flow Monitor

by Codel International Ltd     based in Bakewell, UNITED KINGDOM

Continuous emission monitoring often only considers the density of the emissions (e.g mg/Nm3) In order to obtain a measurement of total emissions for pollution monitoring (e.g kg/hr) it is necessary to either calculate or measure flow within the gas stream. The VCEM5000 provides non-contact measurement of gas velocity using a time-delay ...

Model DCEM2100 - Dual Pass Opacity / Dust Monitor

by Codel International Ltd     based in Bakewell, UNITED KINGDOM

The DCEM2100 is a dual-pass transmissometer configured for the continuous measurement of opacity and dust concentration in flue gases. Its unique optical arrangement provides continuous measurements of transmissivity of visible light across the stack in opposite directions, providing not only an accurate average of the dust loading in the stack, ...

Model DCEM2000 - Dual Pass Opacity / Dust Monitor

by Codel International Ltd     based in Bakewell, UNITED KINGDOM

The DCEM2000 is a dual-pass transmissometer configured for the continuous measurement of opacity and dust concentration in flue gases. Its unique optical arrangement provides continuous measurements of transmissivity of visible light across the stack in opposite directions, providing not only an accurate average of the dust loading in the stack, ...


Procal - Model 5000 - UV Emissions Analyser

by Parker Procal     based in Peterborough, UNITED KINGDOM

Procal 5000 is an ultra-violet (UV), continuous emission monitoring analyser, designed for in situ analysis of gas-phase emission components. Using absorption spectroscopy, Procal 5000 stores and analyses the full UV spectrum and calculates the gas emission concentrations. A typical system comprises an in situ analyser, an integral calibration ...

Model GCEM4100 - Multi Channel Extractive Flue Gas Analyser

by Codel International Ltd     based in Bakewell, UNITED KINGDOM

The GCEM4100 is a hot extractive analyser for difficult flue gas monitoring applications. It uses infrared absorption spectroscopy to measure up to seven pollutant species in a single self-contained unit. Many conventional extractive systems require the sampled gas to be cleaned and dried to a very high standard prior to analysis, invariably ...

Model GCEM40 Series - In-situ Flue Gas Analyser

by Codel International Ltd     based in Bakewell, UNITED KINGDOM

The GCEM40 series is our latest generation of in-situ gas analysers. Designed for use primarily on combustion processes the analysers measure the key pollutants such as CO, NO, NO2, NOx, SO2, CH4, HCl, CO2 and H2O.

StakGard - Tribo Electric Indicative Dust Monitor

by Codel International Ltd     based in Bakewell, UNITED KINGDOM

The StakGard uses the well-proven tribo-electric effect to directly measure mass particulate concentration by sensing the frictional charge created when particles collide with a conductor. The advanced electronics of the StakGard detect this signal and present it to the operator via a modulating LED display. The StakGard indicative particulate ...

Model DCEM1001 - Single Pass Opacity Dust Monitor

by Codel International Ltd     based in Bakewell, UNITED KINGDOM

The DCEM1001 Opacity Monitor is a single-pass optical device which uses visible light to measure the opacity and dust concentration within the flue gas. The monitor consists of a transmitter and receiver arrangement with digital data processing in a local display unit. The monitor can display data in either opacity, extinction or dust density in ...

Model DCEM1000 - Single Pass Opacity Dust Monitor

by Codel International Ltd     based in Bakewell, UNITED KINGDOM

The DCEM1000 Opacity Monitor is a single-pass optical device which uses visible light to measure the opacity and dust concentration within the flue gas. The monitor consists of a transmitter and receiver arrangement with digital data processing in a local display unit. The monitor can display data in either opacity, extinction or dust density in ...

Need help finding the right suppliers?

Let the XPRTs do the work for you