emissions standards Equipment

1453 Results found
  • Keyword: emissions standards ×

Model GCEM4100 - Multi Channel Extractive Flue Gas Analyser

by Codel International Ltd     based in Bakewell, UNITED KINGDOM

The GCEM4100 is a hot extractive analyser for difficult flue gas monitoring applications. It uses infrared absorption spectroscopy to measure up to seven pollutant species in a single self-contained unit. Many conventional extractive systems require the sampled gas to be cleaned and dried to a very high standard prior to analysis, invariably ...

Model GCEM4000 - Multi-channel In-situ Flue Gas Analyser

by Codel International Ltd     based in Bakewell, UNITED KINGDOM

The GCEM4000 is a multi-channel flue gas analyser that uses Non-Dispersive Infrared Absorption (NDIR) technology. It provides high accuracy, low maintenance measurement of all the key combustion process emissions to atmosphere. It is capable of operating in very high dust loading conditions, up to several gm/m3 of dust. Its performance can be ...

Model 1010 - Cross Duct CO Gas Analyser

by Codel International Ltd     based in Bakewell, UNITED KINGDOM

The Model 1010 is a single channel cross-duct analyser for the measurement of CO. It uses an infrared transmitter to project a beam of light across the duct to a receiver mounted opposite. The light beam is tuned to a specific wavelength where the CO molecules absorb the light energy but there is no interference from water vapour and other gases. ...

ExhaustTrak - Model Sierra CP Series - Raw Engine Exhaust Mass Flow Meter

by Sierra Instruments, Inc.     based in Monterey, CALIFORNIA (USA)

Sierra CP has successfully manufactured and sold AirTrak intake air mass flow meters since the early 1990's.  With deep roots in flow measurement through our Flow Division, we have

Soot-Trak - Real-Time Diesel Soot Mass

by Sierra Instruments, Inc.     based in Monterey, CALIFORNIA (USA)

The Sierra Instruments Soot-Trak laser measures real-time engine soot particle mass emissions and performs characterization of soot particle particle size, primary particle surface area and number. Soot-Trak provides researchers and engine developers the accurate information they require about particle transport. With measurement accuracy of 5% ...

Model EP Standard Version - Suction Arms

by Airbravo S.r.l.     based in Z.I. Acilia - Dragona, ITALY

The Standard EP Suction Arm Series is suitable for the most demanding designers in applications where a reliable, easy to use, high quality product is required. A series of Arms characterised by a quadruple pantograph support structure external to the suction pipe (patented), completely spring balanced and with no internal components to obstruct ...

Land - Model 4500 MkIII - Opacity and Dust Emissions Compliance Monitor

by Land Instruments International     based in Dronfield, UNITED KINGDOM

The Land Model 4500 MkIII has reset the industry standard on compliance opacity and dust concentration measurement. Combining the unique features of three patented technologies, the 4500 MkIII achieves the highest available specification for the principal performance parameters, as defined by the internationally recognized ASTM Standard D 6216-07.

GRAPHITE - Model 52M - Heated FID Total Hydrocarbon (HC) Analyzer

by Environnement S.A     based in Poissy, FRANCE

Heated FID Total Hydrocarbon (HC) Analyzer.-MCERTs and TÜV certified-Complies with EN 12619 & 13 526 standards (with He/H2 fuel)-Fitted with FID for continuous and simultaneous measurement of Total Hydrocarbons (THC), Non-methanic Hydrocarbons (NmHC) and Methane (CH4) in compliance with EN 12619

Model MIR 9000H - Continuous Stack Emission Monitoring Gas Analyzer

by Environnement S.A     based in Poissy, FRANCE

Continuous stack emission monitoring gas analyzer available in 2 versions for the simultaneous and continuous measurement of:  NH3 and H2O, CO, CO2, NO, NO2, SO2, HCl, HF, O2 in addition of the NH3 and the H2O.  Designed to measure wet and corrosive sample. TÜV certified as compliant to the European standard EN15

In Situ UV & IR DOAS Systems

by Opsis AB     based in Furulund, SWEDEN

The basic Opsis DOAS system consists of an analyser, an emitter and receiver set, a power supply and a fibre optic cable. The analyser is the central unit in the system. The basic functions are to detect and measure gases and to log data. However, the operation may be varied to meet the particular needs in each application.

Need help finding the right suppliers?

Let the XPRTs do the work for you