flow monitoring Equipment in Libya

3490 Results found
  • Keyword: flow monitoring ×

  • Location: Africa ×

  • Location: Libya ×

VCEM5000 - Flue Gas Flow Monitor

by Codel International Ltd

Continuous emission monitoring often only considers the density of the emissions (e.g mg/Nm3) In order to obtain a measurement of total emissions for pollution monitoring (e.g kg/hr) it is necessary to either calculate or measure flow within the gas stream. The VCEM5000 provides non-contact measurement of gas velocity using a time-delay ...

VCEM5100 - Flue Gas Flow Monitor

by Codel International Ltd

Continuous on-line analysis often only considers the density of the emissions (e.g mg/Nm3) In order to obtain a measurement of total emissions for pollution monitoring (e.g kg/hr) it is necessary to either calculate or measure flow within the gas stream. The VCEM5100 provides non-contact measurement of gas velocity using a time-delay correlation ...


Distributed Flow Profiling

by Silixa Ltd

With the increasing complexity of oil and gas wells, it is becoming important to measure the flow profile of a given well on a routine or a continuous basis. This involves understanding the production contribution of individual perforated intervals, the production contribution from individual fractures, as well as knowledge of the fluids (Oil, ...

TunnelCraft - 4 - Air Flow Monitor (AFM)

by Codel International Ltd

The Air Flow Monitor (AFM) uses ultrasonic technology to measure air velocity. A single transmitter and an array of four receivers are contained in the measuring head. Air velocity and direction are calculated from measurements of the phase shifts from the ultrasonic signals at the receivers. The sensor is compact, contains no moving components, ...

TunnelCraft - III - Air Flow Monitor

by Codel International Ltd

The Air Flow Monitor (AFM) uses ultrasonic technology to measure air velocity. A single transmitter and an array of four receivers are contained in the measuring head. Air velocity and direction are calculated from measurements of the phase shifts from the ultrasonic signals at the receivers. The sensor is compact, contains no moving components, ...

SLT 5.0 - Level & Flow Monitor

by Greyline Instruments Inc.

Use this versatile instrument to continuously measure, display, transmit and control liquid level in storage tanks and pumping stations, or to monitor and totalize Open Channel Flow through any flume or weir. Mount the non-contacting ultrasonic sensor above the liquid being measured and install the watertight electronics enclosure nearby. Features ...

DulcoFlow - Flow Meter

by ProMinent Group - ProMinent GmbH

The measuring instrument operates based on the ultrasonic measurement method. Media contacting parts are manufactured using chemically resistant PVDF. This ensures that aggressive media can also be measured without problem. The instrument is installed directly in the pipe of the medium being measured. Interfering influences, such as air bubbles, ...

AVFM 5.0 - Area-Velocity Flow Monitor

by Greyline Instruments Inc.

Monitor flow through open channels, partially full sewer pipes and surcharged pipes without a flume or weir. Ideal for stormwater, combined effluent, raw sewage, irrigation water and streams. Calibration is simple: enter the pipe diameter or channel shape and the AVFM 5.0 computes the flow volume and displays the flow rate. Measure forward and ...

OCF 5.0 - Open Channel Flow Monitor

by Greyline Instruments Inc.

Continuously monitor, display, totalize and data log flow through any flume or weir. The OCF 5.0 includes a non-contacting ultrasonic sensor that mounts just 8' (203.2 mm) above the flowing water. It is accurate (±0.25%) and reliable. There is no obstruction to flow and no fouling. Use the built-in Keypad/menu system to select your flume or ...


DynOptic - DSL-220 MkIII - Single Pass Opacity Monitor for Monitoring Opacity and Smoke Emissions

by DynOptic Systems Ltd

The DSL-220 Opacity Monitor is an optical instrument designed to measure the visible opacity of exhaust gas in a duct, stack or flue.The DSL-220 uses the single pass light transmission measurement technique, with Transmitter/Receiver arrangement. A light beam emitted from the Transmitter passes across the stack to a Receiver, which measures the ...

Need help finding the right suppliers?

Let the XPRTs do the work for you