flow monitoring Equipment in New York

Serving New York | Office in New YorkNear New York
3174 Results found
  • Keyword: flow monitoring ×

  • Location: USA ×

  • Location: New York ×

Greyline - Model AVFM 5.0 - Area-Velocity Flow Monitor

by Greyline Instruments Inc.     based in Long Sault, ONTARIO (CANADA)

Monitor flow through open channels, partially full sewer pipes and surcharged pipes without a flume or weir. Ideal for stormwater, combined effluent, raw sewage, irrigation water and streams. Calibration is simple: enter the pipe diameter or channel shape and the AVFM 5.0 computes the flow volume and displays the flow rate. Measure forward and ...

Greyline - Model OCF 5.0 - Open Channel Flow Monitor

by Greyline Instruments Inc.     based in Long Sault, ONTARIO (CANADA)

Continuously monitor, display, totalize and data log flow through any flume or weir. The OCF 5.0 includes a non-contacting ultrasonic sensor that mounts just 8' (203.2 mm) above the flowing water. It is accurate (±0.25%) and reliable. There is no obstruction to flow and no fouling. Use the built-in Keypad/menu system to select your flume or ...

Greyline - Model SLT 5.0 - Level & Flow Monitor

by Greyline Instruments Inc.     based in Long Sault, ONTARIO (CANADA)

Use this versatile instrument to continuously measure, display, transmit and control liquid level in storage tanks and pumping stations, or to monitor and totalize Open Channel Flow through any flume or weir. Mount the non-contacting ultrasonic sensor above the liquid being measured and install the watertight electronics enclosure nearby. Features ...

Greyline - Model AVMS 5.1 - Multi-Sensor Area-Velocity Flow Monitor

by Greyline Instruments Inc.     based in Long Sault, ONTARIO (CANADA)

Monitor flow through large open channels, partially full sewer pipes and surcharged pipes without a flume or weir. Designed for municipal stormwater, stream flow, irrigation water, raw sewage, sluiceways, water intake channels, cooling water discharges and industrial effluent.

Model VCEM5100 - Flue Gas Flow Monitor

by Codel International Ltd     based in Bakewell, UNITED KINGDOM

Continuous on-line analysis often only considers the density of the emissions (e.g mg/Nm3) In order to obtain a measurement of total emissions for pollution monitoring (e.g kg/hr) it is necessary to either calculate or measure flow within the gas stream. The VCEM5100 provides non-contact measurement of gas velocity using a time-delay correlation ...

Model VCEM5000 - Flue Gas Flow Monitor

by Codel International Ltd     based in Bakewell, UNITED KINGDOM

Continuous emission monitoring often only considers the density of the emissions (e.g mg/Nm3) In order to obtain a measurement of total emissions for pollution monitoring (e.g kg/hr) it is necessary to either calculate or measure flow within the gas stream. The VCEM5000 provides non-contact measurement of gas velocity using a time-delay ...

TunnelCraft - Model III - Air Flow Monitor

by Codel International Ltd     based in Bakewell, UNITED KINGDOM

The Air Flow Monitor (AFM) uses ultrasonic technology to measure air velocity. A single transmitter and an array of four receivers are contained in the measuring head. Air velocity and direction are calculated from measurements of the phase shifts from the ultrasonic signals at the receivers. The sensor is compact, contains no moving components, ...

TunnelCraft - Model 4 - Air Flow Monitor (AFM)

by Codel International Ltd     based in Bakewell, UNITED KINGDOM

The Air Flow Monitor (AFM) uses ultrasonic technology to measure air velocity. A single transmitter and an array of four receivers are contained in the measuring head. Air velocity and direction are calculated from measurements of the phase shifts from the ultrasonic signals at the receivers. The sensor is compact, contains no moving components, ...

Pulsar - Flow Monitor

by Pulsar Process Measurement Ltd     based in Worcestershire, UNITED KINGDOM

Flow Monitor is a dedicated wall mounted device for Flow Pulse and can only be used with the Flow Pulse unit. Flow Monitor provides the power and interface for the Flow Pulse via a 4-core cable. It expands the capability of Flow Pulse, providing two relays that can be programmed as alarm or control for flow or velocity. Either relay can be ...

Pulsar - Model Flow Pulse® - Non-invasive Clamp-on Flow Monitor for Pipes

by Pulsar Process Measurement Ltd     based in Worcestershire, UNITED KINGDOM

Flow Pulse® is a unique, non-invasive flow monitor that clamps to the outside of a pipe and is simply secured with a screwdriver. Flow Pulse offers you exceptional repeatability at a fraction of the cost of an equivalent magflow meter. It can reliably monitor flow across a variety of pipe materials including rigid plastic, stainless steel, cast ...

Need help finding the right suppliers?

Let the XPRTs do the work for you