flowmeter Equipment in Dominica

Serving Dominica | Near Dominica
416 Results found
  • Keyword: flowmeter ×

  • Location: Latin America ×

  • Location: Dominica ×

Flowmeter, Digital, Mechanical, w/Standard Rotor

by General Oceanics Inc.     based in Miami, FLORIDA (USA)

Weight in water 113 grams (4 ounces) material: celcon rotor, nickel plated brass nose cone, polycarbonbate body, armaloyed stainless steel main rotor and idler gear shaft. Dimensions length 21.3 cm (8 3/8') diameter: standard rotor 6.98cm (2 3/4') low velocity 16.5cm (6.5'), depth rating unlimited (free flooding) data display: 6 ten digit counter ...

Flowmeter, Digital, Mech., Low Velocity

by General Oceanics Inc.     based in Miami, FLORIDA (USA)

Flowmeter, digital, mech., low velocity weight in air 225 grams (8 ounces) weight in water 113 grams (4 ounces) material: celcon rotor, nickel plated brass nose cone, polycarbonbate body, armaloyed stainless steel main rotor and idler gear shaft. Dimensions length 21.3 cm (8 3/8') diameter: standard rotor 6.98cm (2 3/4') low velocity 16.5cm ...

Model 2135 - Electronic Flowmeter

by General Oceanics Inc.     based in Miami, FLORIDA (USA)

The Model 2135 is a real time, hand held microprocessor controlled data acquisition unit. When used in conjunction with the Model 2031H electronic flowmeter, the unit receives the flow rate pulses and calculates the fluid velocity based on a highly stable crystal controlled time base. The well defined characteristics of the Model 2031H and the ...

Electronic Flowmeters

by General Oceanics Inc.     based in Miami, FLORIDA (USA)

Electronic flowmeters use magnets to actuate a solid-state hall-effect generator, creating a signal for processing by the 2135 Readout or 2135D - Direct Reading Software or can be used as a mechanical counter. Model 2031H is a standard Electronic Flowmeter. Model 2031HR6 uses a high resolution rotor for low-speed operations.

Checker, Flowmeter Calibration

by General Oceanics Inc.     based in Miami, FLORIDA (USA)

The model 2030CF Calibration Frame provides a check on the proper operation of your Model 2030 and 2031 series flowmeters. The frame imparts a torsionally precise spin to the rotor and a count difference is noted in the flowmeter window. A minimum count is necessary for the flowmeter to be within calibration.

Model Digital 7 cts Mech. - Flowmeter - Low Vel

by General Oceanics Inc.     based in Miami, FLORIDA (USA)

Flowmeter, Digital,7CTS Mech.Low Vel. Part Number: 20307R6. Weight: 2.00 lbs.

Flowmeter, Mech. With One Way Clutch

by General Oceanics Inc.     based in Miami, FLORIDA (USA)

Weight in water 113 grams (4 ounces) material: celcon rotor, nickel plated brass nose cone, polycarbonbate body, armaloyed stainless steel main rotor and idler gear shaft. Dimensions length 21.3 cm (8 3/8') diameter: standard rotor 6.98cm (2 3/4') low velocity 16.5cm (6.5'), depth rating unlimited (free flooding) data display: 6 ten digit counter ...

Direct Reading Adaptor, Software & Cable

by General Oceanics Inc.     based in Miami, FLORIDA (USA)

Now you can use your own computer or data logger to display and log data provided by the 2031H electronic flowmeter sensor. This software provides a real time display of Date and Time, Elapsed Time, Speed, Distance and Volume, in user selectable units.

Model Expansion/RS232 - Flowmeter Display with Memory Option

by General Oceanics Inc.     based in Miami, FLORIDA (USA)

Flowmeter display with memory expansion/RS232 option displays impeller type, velocity, total distance, elapsed time, low battery warning indicator and probe status. Freeze and re-set control. Two line, 32 character LCD display. 4 AA batteries and 10 meter cable included Includes memory, RS232 option and software.

Prosonic Flow - Model B 200 - Ultrasonic Flowmeter

by Endress Hauser Instruments International AG     based in Reinach, SWITZERLAND

For accurate, reliable biogas measurement under variable process conditions.

Need help finding the right suppliers?

Let the XPRTs do the work for you