flowmeter calibration Equipment in Malaysia

Serving Malaysia | Office in MalaysiaNear Malaysia
102 Results found
  • Keyword: flowmeter calibration ×

  • Location: Asia & Middle East ×

  • Location: Malaysia ×

Checker, Flowmeter Calibration

by General Oceanics Inc.     based in Miami, FLORIDA (USA)

The model 2030CF Calibration Frame provides a check on the proper operation of your Model 2030 and 2031 series flowmeters. The frame imparts a torsionally precise spin to the rotor and a count difference is noted in the flowmeter window. A minimum count is necessary for the flowmeter to be within calibration.

Proline Promag - Model 800 - Electromagnetic Flowmeters

by Endress Hauser Instruments International AG     based in Reinach, SWITZERLAND

Long-term reliability - long-term operation up to 15 years, Industry-optimized flowmeter - battery powered for locations without a power grid, for pipes up to DN 600 (24'), with drinking water approvals and custody transfer approvals (MI-001, OIML R49), Tried-and-tested sensors - successfully installed in over 1.5 million applications since 1977, ...

HI-Q - Model V-FLO-Series - In-Line Venturi Flow Meters

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

The V-FLO-XX series units incorporate a flowmeter and a precision-machined venturi tube to create a pressure differential across a fixed orifice which floats the indicating ball in the flowmeter. By varying the flow velocities, the pressure differentials are measured & recorded against a laminar flow element whose calibration is certified and ...

Boiler-Trak - Model 620S BT - Mass Flowmeter

by Sierra Instruments, Inc.     based in Monterey, CALIFORNIA (USA)

BoilerTrak is designed to provide an economical and easy to install solution for precise natural gas measurement to heaters and boilers to increase efficiency. The instrument also suited for compliance to new regulations for burning natural gas in commercial boiler applications.

Cal=Trak - Model SL-500 - Gas Mass Flow Meter

by Sierra Instruments, Inc.     based in Monterey, CALIFORNIA (USA)

You’ll get high-precision, cost-effective calibration with our CalTrak™ SL-500 primary standard gas flow calibrator, the first in our CalTrak line of dependable mass gas flow calibration devices. Fast, primary, and portable, the SL-500 offers a standardized accuracy of ±0.35%, making it an easy-to-use, low-maintenance way to ...

Model 2135 - Electronic Flowmeter

by General Oceanics Inc.     based in Miami, FLORIDA (USA)

The Model 2135 is a real time, hand held microprocessor controlled data acquisition unit. When used in conjunction with the Model 2031H electronic flowmeter, the unit receives the flow rate pulses and calculates the fluid velocity based on a highly stable crystal controlled time base. The well defined characteristics of the Model 2031H and the ...

GPE - Model F2001 - Bi-Rotator Flowmeter

by Golden Promise Equipment (GPE) Inc.     based in New York, NEW YORK (USA)

GPE Model F2001 series Bi-Rotator Flowmeter apply pure mechanical structures which guaranteed extream precision and long life-time. Our helical rotators were machined under highest standard which guaranteed (interior housing volume to be constant during measurements) the precision of measurements. Direct mechanical output eliminates further error ...

KRAL - Model OMH Series - High Pressure Flowmeters

by KRAL AG     based in Lustenau, AUSTRIA

With High Pressure to an Accurate Measuring Result.

Greyline - Model TTFM 1.0 - Transit Time Flowmeter for Clean Liquids

by Greyline Instruments Inc.     based in Long Sault, ONTARIO (CANADA)

Accurately measure the flow rate of clean, non-aerated liquids like water, chemicals, and oils in full pipes. Ultrasonic transducers mount on the outside of a pipe without shutting down flow. Flow rate is displayed on the large, backlit display along with totalizer and signal strength. Use the built-in control relays for flow alarms or flow ...

Master-Touch - Flowmeters

by Eldridge Products, Inc. (EPI)     based in Marina, CALIFORNIA (USA)

EPI’s Master-Touch™ flowmeters incorporate the following subsystems to perform signal processing functions: sensor, bridge controller, microcomputer, and I/O communication outputs. Our proprietary microcomputer performs digital signal processing (DSP) functions utilizing a high speed, high resolution 16-bit analog to digital converter ...

Related Terms for flowmeter calibration

Need help finding the right suppliers?

Let the XPRTs do the work for you