flowmeter calibration Equipment in South Dakota

Serving South Dakota | Near South Dakota
153 Results found
  • Keyword: flowmeter calibration ×

  • Location: USA ×

  • Location: South Dakota ×

Checker, Flowmeter Calibration

by General Oceanics Inc.     based in Miami, FLORIDA (USA)

The model 2030CF Calibration Frame provides a check on the proper operation of your Model 2030 and 2031 series flowmeters. The frame imparts a torsionally precise spin to the rotor and a count difference is noted in the flowmeter window. A minimum count is necessary for the flowmeter to be within calibration.


Spire Metering - Model EnduroFlow™ EF10 - Ultrasonic Flowmeters

by Spire Metering Technology     based in Acton, MASSACHUSETTS (USA)

Enduro series ultrasonic flowmeters, EF10 is designed for fixed installation. Its electronic enclosure is rated for IP65 (NEMA 4X) or IP67, thus, it can be installed for both indoor and outdoor.

HI-Q - Model V-FLO-Series - In-Line Venturi Flow Meters

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

The V-FLO-XX series units incorporate a flowmeter and a precision-machined venturi tube to create a pressure differential across a fixed orifice which floats the indicating ball in the flowmeter. By varying the flow velocities, the pressure differentials are measured & recorded against a laminar flow element whose calibration is certified and ...

Model 2135 - Electronic Flowmeter

by General Oceanics Inc.     based in Miami, FLORIDA (USA)

The Model 2135 is a real time, hand held microprocessor controlled data acquisition unit. When used in conjunction with the Model 2031H electronic flowmeter, the unit receives the flow rate pulses and calculates the fluid velocity based on a highly stable crystal controlled time base. The well defined characteristics of the Model 2031H and the ...

Spire Metering - Model REGAL™ RH20 - Handheld Ultrasonic Flowmeter

by Spire Metering Technology     based in Acton, MASSACHUSETTS (USA)

RH20 Handheld Ultrasonic Flowmeter is one of the most powerful flowmeters available for liquid flow measurement. The utilization of our proprietary ultrasonic signal processing, transit-time measurement and signal quality tracking technologies allows the flowmeter to measure liquid flow rate from outside of a pipe reliably and accurately. ...

Spire Metering - Model EnduroFlow™ EF11 - Ultrasonic Flow Meter

by Spire Metering Technology     based in Acton, MASSACHUSETTS (USA)

Yes, as you may have found, ultrasonic flowmeters have many advantages over traditional flowmeters, but, they are just too expensive for many applications. Spire Metering has spent many years on pushing the technology to its limit in order to cut the cost significantly without compromising the performance. We are now proud to present our latest ...

Spire Metering - Model EnduroFlow™ EF12 - Solar Powered Ultrasonic Flowmeters

by Spire Metering Technology     based in Acton, MASSACHUSETTS (USA)

For flow measurement applications in rural area where electrical power is not accessible, the Enduro Series EF12 solar-powered ultrasonic flow meter provides an ideal solution. It has a solar panel, a rechargeable battery and a low-power consumption high-performance ultrasonic flowmeter. All the components, except transducers, are housed in a ...

Model 502500 - Flowmeter

by Knauer-Wissenschaftliche Gerätebau     based in Berlin, GERMANY

The Flowmeter model 502500 is specifically designed for monitoring of the flow rate in chromatography systems. It periodically displays the current flow rate on a large LC display and simultaneously records the measured value to a RS-232 controller. This enables PC supported data processing. It operates with a one point calibration. 115 Volt ...

Model 502500 - Flowmeter

by Knauer-Wissenschaftliche Gerätebau     based in Berlin, GERMANY

The Flowmeter model 502500 is specifically designed for monitoring of the flow rate in chromatography systems. It periodically displays the current flow rate on a large LC display and simultaneously records the measured value in a RS-232 controller. This enables PC supported data processing. It operates with a one point calibration.

Proline Promag - Model E 100 - Electromagnetic Flowmeter

by Endress Hauser Instruments International AG     based in Reinach, SWITZERLAND

Promag E is a streamlined sensor for basic chemical applications. It is the most economical solution for our chemical customers. Combined with the smallest transmitter housing available today it delivers full performance on a smallest footprint. Designed for applications where space is a premium, Promag E 100 will be the preferred choice for ...

Related Terms for flowmeter calibration

Need help finding the right suppliers?

Let the XPRTs do the work for you