flowmeters Equipment in Georgia

Served | Office inNear
552 Results found
  • Keyword: flowmeters ×

  • Location: Asia & Middle East ×

  • Location: Georgia ×

Stevens - Model 61 R - Flowmeter Chart Recorder

by Stevens Water Monitoring Systems, Inc.     based in Portland, OREGON (USA)

Stevens 61R Chart Recorder was installed in thousands of water and wastewater flow measurement applications. Many 61R Chart Recorders are still in operations today. Stevens still provides limited repair service to the 61R as parts are available. The 61R was discontinued in 2000 and replaced with the Stevens AxSys CCR. The ph

Stevens AxSys - Model CCR - Flowmeter - Shaft Encoder

by Stevens Water Monitoring Systems, Inc.     based in Portland, OREGON (USA)

The AxSys Circular Chart Recorder (CCR) is designed to collect data on multiple parameters and to chart any one of those parameters of interest for a quick visual measurement on paper. Typically, the CCR is used as a flowmeter that is programmed to provide instantaneous flow rate value. The CCR is physically designed for an easy

Stevens AxSys - Flowmeter for Water Resource Management

by Stevens Water Monitoring Systems, Inc.     based in Portland, OREGON (USA)

The AxSys Flowmeter is a data acquisition instrument used by organizations responsible for water resource management and control. The AxSys Flowmeter features a programmed rating table to automatically calculated and report on water flow.

Stevens AxSys - Model CCR - Circular Chart Recorder (CCR) Flowmeter

by Stevens Water Monitoring Systems, Inc.     based in Portland, OREGON (USA)

The AxSys Circular Chart Recorder (CCR) is designed to collect data on multiple parameters and to chart any one of those parameters of interest for a quick visual measurement on paper. Typically, the CCR is used as a flowmeter that is programmed to provide instantaneous flow rate value. The CCR is physically designed for an easy

Model Genius 3020 - Nitrogen Generator

by Peak Scientific Instruments Ltd     based in Inchinnan, UNITED KINGDOM

The Genius 3020 Nitrogen Generator combines two individual systems with separate Nitrogen outputs into a single compact unit, thus allowing two separate Mass Spectrometers to be supplied by the same Generator with independent control.

Rotomite - Model 6000 - Hydraulic Dredge

by SRS Crisafulli, Inc.     based in Glendive, MONTANA (USA)

Crisafulli's unique steerable variable speed hydraulically powered propulsion system provides approximately 1,000 pounds of thrust enabling the Rotomite-6000 and its Crisafulli 6' discharge J-Series pump to dredge and process up to 150 cubic yards of sludge and slurries per hour at depths up to 20 feet (standard; deeper in custom models) in a wide ...

Shallow Draft Rotomite - Model SD110 - Self Propelled Dredges

by SRS Crisafulli, Inc.     based in Glendive, MONTANA (USA)

A major feature of SRS Crisafulli’s hydraulic dredges is their ability to pump dredgedsludges and slurries over substantial distances to remote disposal sites. The actualdistance in a particular application depends on several variables including: thenature of the slurry – i. e., the specific gravity, weight, and concentration of solids inthe ...

Boiler-Trak - Model 620S BT - Mass Flowmeter

by Sierra Instruments, Inc.     based in Monterey, CALIFORNIA (USA)

BoilerTrak is designed to provide an economical and easy to install solution for precise natural gas measurement to heaters and boilers to increase efficiency. The instrument also suited for compliance to new regulations for burning natural gas in commercial boiler applications.

Copa - Distributors For Percolating Filter Bed

by Ovivo (Formerly Eimco Water Technologies)     based in Salt Lake City, UTAH (USA)

The percolating filter bed is widely accepted as the most flexible and resilient method of biologically treating wastewater. Ovivo offers filter distributors suited to almost all filter bed applications ranging between 3 metres and 50 metres diameter, accommodating various flow rates. Copa distributors can be fitted onto their own duckfoot for new ...

HI-Q - Model V-FLO-Series - In-Line Venturi Flow Meters

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

The V-FLO-XX series units incorporate a flowmeter and a precision-machined venturi tube to create a pressure differential across a fixed orifice which floats the indicating ball in the flowmeter. By varying the flow velocities, the pressure differentials are measured & recorded against a laminar flow element whose calibration is certified and ...

Need help finding the right suppliers?

Let the XPRTs do the work for you