flue gas treatment Equipment in Fiji

Served | Office inNear
89 Results found
  • Keyword: flue gas treatment ×

  • Location: Australasia ×

  • Location: Fiji ×

Xerosorp For Dry Scrubbing Flue Gas Treatment Process

by Hitachi Zosen Inova     based in Zurich, SWITZERLAND

The dry scrubbing flue gas treatment process is designed to remove acidic gaseous contaminants by absorption with sodium bicarbonate. Due to the very high reactivity of sodium bicarbonate, only a small stoichiometry amount is required. The process is nearly independent of temperature and thus enables maximum energy recovery.

Inova Semi Dry Flue Gas Treatment Process

by Hitachi Zosen Inova     based in Zurich, SWITZERLAND

Semi Dry: Simple, Effective and Waste Water Free. The semi dry flue gas treatment process removed acidic gaseous contaminants by neutralisation with hydrated lime dust. Heavy metal compounds and organic contaminants, such as dioxins and furans, are separated by adsorption onto activated carbon in the same process step.

Tekran - Model 3300Xi - Mercury Continuous Emission Monitor

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The EPA Electric Generating Unit Mercury and Air Toxics (EGU MATS) and Portland Cement Maximum Achievable Control Technology (PC MACT) regulations require reductions in gaseous mercury emissions. Tekran has proven technology to support mercury compliance monitoring, abatement system optimization, and performance audit testing instrumentation.

Sorbacal - Model HSH - Single-Pass Dry Flue Gas Treatment

by Lhoist Group     based in Limelette, BELGIUM

Sorbacal HSH is a calcium hydroxide specifically developed for the single-pass dry flue gas treatment. It differs from Sorbacal H with a higher specific surface area (SSA): 15-18 m²/g for Sorbacal H and 25 m²/g for Sorbacal HSH. Sorbacal HSH was developed for the specifications of the Brazilian market and is produced in Brazil today.

Flue Gas Treatment Systems

by Lodge Cottrell Ltd     based in Birmingham, UNITED KINGDOM

Typically flue gas treatment systems are required when particulates and other gaseous pollutants are required to be removed from exhausts.Such pollutants include acid gases (such as SO2, HCl, etc.), heavy metals (such as mercury) and dioxins. Typically such pollutants are created by the conversion of waste or biomass into energy.

THERMOX - Model WDG-IVM/IQ - Smart Flue Gas Analyzers

by Ametek Process Instruments - THERMOX     based in Pittsburgh, PENNSYLVANIA (USA)

The WDG-IVM analyzer measures oxygen, combustibles and methane in natural gas-fired applications. It is ideal for gas-fired power boilers or for those using natural gas during start-up and shutdown. With this analyzer, you can monitor oxygen and combustibles for maximum fuel efficiency. In addition, the methane detector can be used for purge and ...

Fluepac - Model MC - Powdered Activated Carbon

by Calgon Carbon Corporation     based in Pittsburgh, PENNSYLVANIA (USA)

FLUEPAC-MC is a powdered activated carbon produced from bituminous coal specifically for use in flue gas treatment applications. Its surface area and pore volume make it very effective in removing many flue gas contaminants.

Fluepac - Model D - Powdered Reactivated Carbon

by Calgon Carbon Corporation     based in Pittsburgh, PENNSYLVANIA (USA)

Calgon Carbon's Fluepac D powder product is made from recycled granular activated carbon. The inherited surface area and pore volume make Fluepac D very effective in removing many flue gas contaminants.

Fluepac - Model CF Plus - Powdered Activated Carbon

by Calgon Carbon Corporation     based in Pittsburgh, PENNSYLVANIA (USA)

FLUEPAC-CF PLUS is a powdered activated carbon specially formulated with a proprietary ingredient to enhance mercury capture in flue gas treatment applications. FLUEPAC CF PLUS is specially manufactured to provide effective mercury removal while not adversely impacting the air retention properties of the resultant fly ash.

Fluepac - Model CF - Powdered Activated Carbon

by Calgon Carbon Corporation     based in Pittsburgh, PENNSYLVANIA (USA)

FLUEPAC-CF is a powdered activated carbon specifically for use in flue gas treatment applications. It is specially manufactured to provide effective mercury removal performance while not adversely affecting the air retention properties of the resultant fly ash.

Related Terms for flue gas treatment

Need help finding the right suppliers?

Let the XPRTs do the work for you