flue gas treatment Equipment in Pennsylvania

Serving Pennsylvania | Office in PennsylvaniaNear Pennsylvania
90 Results found
  • Keyword: flue gas treatment ×

  • Location: USA ×

  • Location: Pennsylvania ×

Gas Cooling and Drying System for Flue Gas Treatment

by Hofstetter BV     based in Schiphol-Rijk, NETHERLANDS

The gas temperature and moisture content is conditioned to the required level by cooling and condensation of the moisture in the gas. Depending on the required conditions air fin gas coolers or chiller systems are used to cool and condense the gas. After cooling/condensation the moisture droplets are removed from the gas with moisture ...

Flue Gas Treatment systems

by Lodge Cottrell Ltd     based in Halesowen, UNITED KINGDOM

Typically flue gas treatment systems are required when particulates and other gaseous pollutants are required to be removed from exhausts. Such pollutants include acid gases (such as SO2, HCl, etc.), heavy metals (such as mercury) and dioxins. Typically such pollutants are created by the conversion of waste or biomass into energy. Under such cir

Flue Gas Treatment Products

by Redecam Group S.r.l.     based in Sesto San Giovanni MI, ITALY

Redecam’s complete product portfolio, coupled with our experts’ technological know-how, allow us to tackle the most challenging flue gas treatment (FGT) issues, allowing you to reach your emissions reduction requirements in an efficient, cost-effective and rapid manner. Based on the required abatement percentage(s), we will design ...

Flue Gas Treatment Systems

by Lodge Cottrell Ltd     based in Halesowen, UNITED KINGDOM

Typically flue gas treatment systems are required when particulates and other gaseous pollutants are required to be removed from exhausts.Such pollutants include acid gases (such as SO2, HCl, etc.), heavy metals (such as mercury) and dioxins. Typically such pollutants are created by the conversion of waste or biomass into energy.

Inova Semi Dry Flue Gas Treatment Process

by Hitachi Zosen Inova     based in Zurich, SWITZERLAND

Semi Dry: Simple, Effective and Waste Water Free. The semi dry flue gas treatment process removed acidic gaseous contaminants by neutralisation with hydrated lime dust. Heavy metal compounds and organic contaminants, such as dioxins and furans, are separated by adsorption onto activated carbon in the same process step.

Xerosorp For Dry Scrubbing Flue Gas Treatment Process

by Hitachi Zosen Inova     based in Zurich, SWITZERLAND

The dry scrubbing flue gas treatment process is designed to remove acidic gaseous contaminants by absorption with sodium bicarbonate. Due to the very high reactivity of sodium bicarbonate, only a small stoichiometry amount is required. The process is nearly independent of temperature and thus enables maximum energy recovery.

Sorbacal - Model HSH - Single-Pass Dry Flue Gas Treatment

by Lhoist Group     based in Limelette, BELGIUM

Sorbacal HSH is a calcium hydroxide specifically developed for the single-pass dry flue gas treatment. It differs from Sorbacal H with a higher specific surface area (SSA): 15-18 m²/g for Sorbacal H and 25 m²/g for Sorbacal HSH. Sorbacal HSH was developed for the specifications of the Brazilian market and is produced in Brazil today.

THERMOX - Model WDG-IVM/IQ - Smart Flue Gas Analyzers

by Ametek Process Instruments - THERMOX     based in Pittsburgh, PENNSYLVANIA (USA)

The WDG-IVM analyzer measures oxygen, combustibles and methane in natural gas-fired applications. It is ideal for gas-fired power boilers or for those using natural gas during start-up and shutdown. With this analyzer, you can monitor oxygen and combustibles for maximum fuel efficiency. In addition, the methane detector can be used for purge and ...

FluePac - Model C - Powdered Reactivated Carbon

by Calgon Carbon Corporation     based in Pittsburgh, PENNSYLVANIA (USA)

FLUEPAC-C is a powdered reactivated carbon produced from bituminous coal specifically for use in flue gas treatment applications. Its surface area and pore volume make it very effective in removing many flue gas contaminants.

Fluepac - Model A - Powdered Reactivated Carbon

by Calgon Carbon Corporation     based in Pittsburgh, PENNSYLVANIA (USA)

FLUEPAC-A is a powdered reactivated carbon produced from bituminous coal specifically for use in flue gas treatment applications. FLUEPAC-A has a high effective surface area and a large pore volume making it very effective in removing many flue gas contaminants.

Need help finding the right suppliers?

Let the XPRTs do the work for you