gas cleaning Equipment in Saskatchewan

Serving Saskatchewan | Office in SaskatchewanNear Saskatchewan
1084 Results found
  • Keyword: gas cleaning ×

  • Location: Canada ×

  • Location: Saskatchewan ×

Biological Gas Cleaning System

by Bilgeri EnvironTec GmbH     based in Fussach, AUSTRIA

Biogas and landfill gas always contains some hydrogen sulfide (H2S). Usually, it moves in the range of 1,000 to 6.000ppm, but can also reach 2% by volume or more. Often this H2S must be removed from the gas, either for reasons of environmental protection or because corrosion danger. The EnvironTec desulfurization process provides a cost effective ...

Elex - Catalytic Gas Cleaning Systems

by Elex AG     based in Schwerzenbach, SWITZERLAND

Since 1988, ELEX has been supplying installations for the catalytic cleaning of gases. The process reduces toxic elements such as NOx, dioxin and furan and hydrocarbon and ammonia in order to comply with the toughest requirements worldwide and without producing residues that will require disposal.

Waste Gas Cleaning Plant

by Adelmann Umwelt GmbH     based in Karlstadt, GERMANY

Spray dryer with lignit-coke-station: Exhaust emission volume from 1.000 to 80.000 m³/h.  Input temperature from 150 to 1.450°C. Evaporating cooler: Exhaust emission volume of 150 to 100.000 m³/h. Input temperature from 150 to 1.450°C. SNCR plant; NH4OH evaporator: Ammonia water from 20 to 3.000 kg/h. Ozone annihilator: Air ...

GE - Model Clean Cycle 125™ - Organic Rankine Cycle (ORC) Systems

by Clarke Energy     based in Liverpool, UNITED KINGDOM

Organic Rankine Cycle (ORC) systems utilise waste heat produced from industrial processes such as gas engine exhausts to provide additional electrical power. They can be used to generate additional electrical power for cogeneration plants using a surplus heat.

Filcon - Hot Flue Gas Cleaning Equipment

by Filcon A/S     based in Slagelse, DENMARK

Hot flue gas cleaning equipment; To help keep our environment clean, Filcon specializes in the treatment of hot flue gas. Hot flue gas can be generated from biomass, gasification, and/or incinerator plants, and might contain high concentrations of chemical particles which are harmful for humans and the environment. Filcon flue gas treatment ...

GAS - Model EF-051 - Multi-Purpose Restroom Odor Eliminator for Drains, Toilets, & Urinals

by Global Aqua Solutions, LLC     based in Minden, NEVADA (USA)

Is a powerful, fast acting deodorizing solution specifically designed to target and eliminate the toughest Sewer and Restroom odors in Floor Drains, Urinals, Toilets, Shower & Tub Drains and Sinks. Restroom Drain Freshener will eliminate odors from hydrogen sulfide, ammonia, mercaptans, urine, feces, bacteria, mold and many other ...

Clean Air Technology: Wet Gas Cleaning

by Michaelis GmbH & Co. KG     based in Veitshöchheim, GERMANY

According to the local emission regulations particles or gaseous pollutants have to be removed from the flue gas.

DuPont - Marine Scrubber Exhaust Gas Cleaning Systems (EGCS)

by Belco Technologies Corporation (BELCO)     based in Parsippany, NEW JERSEY (USA)

The DuPont Marine Scrubber for ship exhaust gas cleaning reduces sulphur (SO2) and particulate emissions from ship engines, generators, and boilers. Our scrubber systems enable ships to meet sulphur emission limits as required by IMO MARPOL Annex VI regulations without switching to low-sulphur fuel.

GA - Model Series X955SS - Stainless Steel Air & Vacuum Valve

by GA Industries, LLC     based in Cranberry Township, PENNSYLVANIA (USA)

The Figure X935SS is ideal when the fluid not clean and/or the ambient conditions are corrosive. It is ideally suited to coastal installations or when the vault is subject to flooding. The Figure X935SS is available in 2” x 1” (1” size with 2” NPT connection) or 2” x 2” (2” size with 2” NPT ...

GA - Model Series 935 - Wastewater Air & Vacuum Valve

by GA Industries, LLC     based in Cranberry Township, PENNSYLVANIA (USA)

The Figure 935 Air & Vacuum valve is recommended when the fluid is not clean, such as wastewater or raw sewage. Its elongated body minimizes spurting and helps keep solids and debris from affecting valve performance. The Figure 935 is available with 2” or 3” (DN50 or DN80) NPT or 4” to 8” (DN100 to DN200) with ANSI or ...

Need help finding the right suppliers?

Let the XPRTs do the work for you