gas flow Equipment in Ontario

2985 Results found
  • Keyword: gas flow ×

  • Location: Canada ×

  • Location: Ontario ×

HORIBA - PTFM-1000 - Pitot Tube Flow Meter

by HORIBA Europe GmbH

The PTFM-1000 is used for the direct measurement of engine exhaust gas flow rate on engine and chassis dynamometer test systems. The PTFM provides the exhaust flow rate without requiring a CVS for CO2 tracer or modification to the engine for air and fuel flow measurement. Meets the accuracy requirements of ISO 16183. (+/- 1.5% of max fl ow or +/- ...

CGA - 600 Series - Fixed Flow Rate Regulator for Non-Reactive Gases

by Argus-Hazco

Maximum inlet pressure: 500 psig. Outlet pressure: 30 psig. Material of construction: Brass / Nickel Plates. Inlet connection: CGA 600: 1”-20. Outlet connection: Hose Barb 3/16”. Cylinder compatibility: 17S & 34S. Shut off: Push Button. Flow rates: 0.5, 1.0, 1.5, 2.0, 2.5 LPM.


Distributed Flow Profiling

by Silixa Ltd

With the increasing complexity of oil and gas wells, it is becoming important to measure the flow profile of a given well on a routine or a continuous basis. This involves understanding the production contribution of individual perforated intervals, the production contribution from individual fractures, as well as knowledge of the fluids (Oil, ...

HORIBA - 510 Series - Gas Analyzers

by HORIBA Europe GmbH

The 510 series of general-purpose gas analyzers provide continuous monitoring of concentrations of the specific sample gas. The analyzers can be operated from controls on the front panel or by commands from a remote computer. Measurement results are displayed on the front panel and are available to remote data logging systems through an ...

MEXA-1400QL-NX - Gas Analyzer

by HORIBA Europe GmbH

The MEXA-1400QL-NX is an exhaust gas analyzer for four nitrogen compounds simultaneously,i.e. NO, NO2, N2O and NH3, utilizing mid-infrared Quantum Cascade Laser technology. By using the high power, high resolution lasers, the analyzer can measure each component accurately,even in low concentrations, with minimum interference from other components ...

HORIBA - GPS5 - Gas Sampling System

by HORIBA Europe GmbH

HORIBA gas samplers are suitable for volume-correct taking of gaseous samples during emission and emission measurements. This device can be used wherever gases and gaseous components must be inspected.


V-tex - Gas Scrubbing

by ERG (Air Pollution Control) Ltd

V-tex is an outstanding scrubbing and stripping technology, providing users with a highly efficient scrubbing/stripping unit operation, in a fraction of the height of a traditional packed tower. And thanks to the opposed-jet spray nozzle at the heart of the technology, V-tex offers flexible, robust operability and unrivalled, maintenance-free ...

Sure Flow Sight Flow Indicator

by Proflow Instrumentation Systems

The SERIES SFB and SFP sight flow indicator meets the needs of simple flow applications. Either the Rising Ball or Paddle Style will satisfy most application needs when calibrated flow indicators are not required. Constructed from high quality materials these in-line indicators are suitable for many applications including water, oil, chemicals, ...


RKI - GX-2012 LEL-O2-CO-H2S - Smallest Personal 5 Sensor Gas Monitor

by Argus-Hazco

Built around high-quality micro-sensor technology, the GX-2012 is RKI’s smallest personal 5 sensor gas monitor with a built in sample pump. Weighing only 12.3 ounces, two operating modes: Normal (for confined spaces) and Bar Hole. The GX-2012 can monitor the standard confined space gases (LEL combustibles, Oxygen content, Carbon Monoxide, ...

DFS-II - Doppler Flow Switch

by Greyline Instruments Inc.

Control Flow from outside a pipe. Recommended for 'difficult liquids' including wastewater, slurries, sludge, chemicals, viscous liquids and abrasives. The Greyline DFS-II is ideal for pump protection or to activate flow/no-flow alarms.

Need help finding the right suppliers?

Let the XPRTs do the work for you