gas flow Equipment in New Jersey

3441 Results found
  • Keyword: gas flow ×

  • Location: USA ×

  • Location: New Jersey ×

Model VCEM5100 - Flue Gas Flow Monitor

by Codel International Ltd

Continuous on-line analysis often only considers the density of the emissions (e.g mg/Nm3) In order to obtain a measurement of total emissions for pollution monitoring (e.g kg/hr) it is necessary to either calculate or measure flow within the gas stream. The VCEM5100 provides non-contact measurement of gas velocity using a time-delay correlation ...

Model VCEM5000 - Flue Gas Flow Monitor

by Codel International Ltd

Continuous emission monitoring often only considers the density of the emissions (e.g mg/Nm3) In order to obtain a measurement of total emissions for pollution monitoring (e.g kg/hr) it is necessary to either calculate or measure flow within the gas stream. The VCEM5000 provides non-contact measurement of gas velocity using a time-delay ...

Cal=Trak - Model XL Series - Gas Mass Flow Standard

by Sierra Instruments, Inc.

Sierra’s Cal=Trak XL is the leading high flow primary standard calibrator in industry and offers a standardized accuracy of +/-0.25%. With increased demand for higher flows of process gas, there is a requirement for a way to validate and calibrate high flow gas meters and controllers. Like all members of Sierra’s Cal=Trak family of ...

Cal=Trak - Model SL-800 - Gas Mass Flow Standard

by Sierra Instruments, Inc.

The Cal=Trak SL-800 offers a standardized accuracy of ±0.15% of reading, superior to all other commercial laboratory standards. The Model SL-800 is fast, primary, Mercury-free and easy-to-use. The dimensionally-based primary accuracy of the Cal=Trak surpasses pressure-based secondary methods and is backed by a rigorous uncertainty analysis. ...

Cal=Trak - Model SL-500 - Gas Mass Flow Meter

by Sierra Instruments, Inc.

You’ll get high-precision, cost-effective calibration with our CalTrak™ SL-500 primary standard gas flow calibrator, the first in our CalTrak line of dependable mass gas flow calibration devices. Fast, primary, and portable, the SL-500 offers a standardized accuracy of ±0.35%, making it an easy-to-use, low-maintenance way to ...


Model EMP-2 - Portable/Handheld Mercury Analyzer Meter

by Nippon Instruments North America

The model EMP-2 is designed for measuring of gaseous mercury in work environments. It is compact, light-weight and battery-powered and can be carried virtually anywhere. The EMP-2 has sensitivity limits down to 0.1 ug/m3. Measured data is automatically acquired and recorded into a built in data-logger and can be retrieved via PC for data ...

Innova-Switch - Flow Switch for Gases & Liquids

by Sierra Instruments, Inc.

Switches on a flow/no flow condition in both gases and liquids. Flow Switch range of 0.01 to 5 sfps (.003 to 1.524 smps) in liquids and 0.1 to 500 sfps (.03 to 152.4 smps) gases. Response Time of 0.5 to 10 seconds (media dependent) Wide operating temperature range of -100F to +390F (-70C to 200C) CE, CENELEC and CSA approvals.

Side-Trak - Model 840 - Analog Gas Mass Flow Controller

by Sierra Instruments, Inc.

Get accurate, reliable mass flow control with Sierra’s SideTrak® Model 840 analog mass flow meter and controller. With precise primary standard calibration to measure any clean, dry gas under with low pressure drop – including oxygen, mixtures, toxics, corrosives and combustibles – the SideTrak flow meter has proven ...


LaserGas - Model II - Single Path Monitor for In-Situ Measurement in Stacks

by Neo Monitors AS

Single Path Monitors are designed for in-situ measurement in stacks, ducts, or reactors with typical path lengths in the range 0.5 to 20 meters. By-pass and extractive configurations are also possible. The monitors’ compact design comprises the transmitter unit with laser module; collimating optics, and main electronics and the receiver unit ...

Micro-Trak - Model 101 - Ultra Low Flow Mass Flow Meters & Controllers

by Sierra Instruments, Inc.

As today's science and engineering focus more and more on micro technology, the requirement to be able to measure and control extremely low gas mass flows has become very important. With state-of-the-art sensor technology and highly engineered direct acting valve design, MicroTrak accurately measures and controls micro mass flows of gas previously ...

Need help finding the right suppliers?

Let the XPRTs do the work for you