gas monitoring systems Equipment in Montana

Serving Montana | Office in MontanaNear Montana
2022 Results found
  • Keyword: gas monitoring systems ×

  • Location: USA ×

  • Location: Montana ×

Protir - Model 204C - Gas Monitoring Systems

by Protea Limited     based in Cheshire, UNITED KINGDOM

When process or emission gas measurements are required from a fixed point or range of sample points, Protea can supply a bespoke fixed measurement system. At the heart of all ProtIR 204C gas monitoring systems is the 204M gas analyser, surrounding which is a configurable set of automation and control systems to allow Continuous Emissions ...

RAE Systems - Model QRAE Plus - Compact, One-To-Four Sensor Gas Detector

by Argus-Hazco     based in Chesterfield, MICHIGAN (USA)

The QRAE Plus is a full-featured, compact, one-to-four sensor gas detector. The standard combustible gas sensor provides readings in the 0-100% LEL (lower explosion limit) range. The optional dual-mode combustible gas sensor provides 0-10% LEL readings as well as 1-100% by volume range when operated in the 'TC' (thermal conductivity) mode.

RAE Systems MultiRAE - Model QRAE II 02-LEL-CO-H2S - QRAE II 02-LEL-CO-H2S

by Argus-Hazco     based in Chesterfield, MICHIGAN (USA)

The QRAE II is a full-featured, compact, one-to-four sensor gas detector for detection of Combustibles, Oxygen, Hydrogen Sulfide and Carbon Monoxide. Key features include easy-to-charge, externally accessed battery packs (available in rechargeable and alkaline versions), and a water-resistant case and a new state of the art O2 sensor technology ...

RAE System AutoRAE - Model 2 - Automatic Test and Calibration System

by Argus-Hazco     based in Chesterfield, MICHIGAN (USA)

The AutoRAE 2 Automatic Test and Calibration System makes compliance with gas monitor test and calibration requirements as easy as pressing a button. Simply cradle the monitor on its form-fitting product-specific cradle and the system automatically takes care of all calibration, testing, and recharging.

RAE Systems GammaRAE - Model II R - Gas Monitor

by Argus-Hazco     based in Chesterfield, MICHIGAN (USA)

The GammaRAE II R is two instruments in one: it has the rapid response of a detector and the accurate dose measurement of a dosimeter. This instrument contains two separate sensors. The Cesium Iodide (CsI) scintillator provides a fast, two-second response to radiological threats, while the energy-compensated PIN diode provides high dose rate range ...

RAE Systems MultiRAE - Multi-Gas Monitor with PID (Wireless)

by Argus-Hazco     based in Chesterfield, MICHIGAN (USA)

The MultiRAE’s PID sensor detects volatile organic compounds (VOCs), and supports over 30 electrochemical, NDIR, and catalytic sensors to detect up to five additional threats. These include: toxic and combustible gases, oxygen deficiency/enrichment, and carbon dioxide. The MultiRAE’s wireless capability elevates worker protection to ...

RAE Systems ToxiRAE - Model Pro - LEL - PID - Single-Gas Monitors

by Argus-Hazco     based in Chesterfield, MICHIGAN (USA)

The ToxiRAE Pro is the industry’s first and largest family of wireless* personal single-gas monitors that protect people from a full range of common toxic industrial gases (ToxiRAE Pro), volatile organic compounds (ToxiRAE Pro PID), and combustible gases (ToxiRAE Pro LEL). Customers deploying ToxiRAE Pro instruments on the RAE Systems ...

RAE Systems MultiRAE - Piston Hand Sampling Pump

by Argus-Hazco     based in Chesterfield, MICHIGAN (USA)

RAE Systems' Hand Pump is for use with RAE Systems' Gas Detection Tubes. The Hand Pump, along with the Tubes, offers quick, on-the-spot measurements of many gases and vapors at low cost without the need for calibration. Springless piston design for accurate 50 and 100 cc volumes along with a tube tip breaker and glass tip holder.

RAE Systems UltraRAE - Model 3000 - Photoionization Detector (PID)

by Argus-Hazco     based in Chesterfield, MICHIGAN (USA)

Its Photoionization Detector's (PID) extended range of 0.05 to 10,000 ppm in VOC mode and 50 ppb to 200 ppm in benzene-specific mode makes it an ideal instrument for applications from entry pre-screening during refinery and plant maintenance to hazardous material response, marine spill response and refinery down-stream monitoring.

Air check - Model Ex - H2 Gas Monitoring System

by PureAire Monitoring Systems, Inc     based in Lake Zurich, ILLINOIS (USA)

The Air check Ex H2 Gas Monitoring System is a compact gas monitoring system that’s ideal for continuously monitoring toxic and corrosive gases in hazardous areas. The Air check Ex non-intrusive calibration allows sensor calibration in hazardous areas without area declassification. The only tool required is a small magnetic wand, designed to ...

Related Terms for gas monitoring systems

Need help finding the right suppliers?

Let the XPRTs do the work for you