gas sampling Equipment in Estonia

Served | Office inNear
1989 Results found
  • Keyword: gas sampling ×

  • Location: Europe ×

  • Location: Estonia ×

Model BCR 01 - Sample Gas Coolers

by AGT Thermotechnik GmbH & Co.KG     based in Erkelenz, GERMANY

BCRs are the allround talents among compressor coolers. They are installed in all applications where pure coolers are needed without additional conditioning equipment.  BCR sample gas coolers can be optionally equipped with PVDF-, glass- and/or stainless-steel-heat-exchangers. Thus BCR sample gas coolers can cool down nearly every gaseous ...

HI-Q - Dry Gas Totaling Meters

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q offers a wide range of dry gas totaling meters which, when incorporated in an air sampling system, are an excellent source for recording the total volume of air sampled. The gas-totaling meter may either be connected to have gas supplied through the inlet (connected to the exhaust of a positive displacement pump) or drawn through the outlet ...

Model XC-260 - Manual Mercury Sampling Console

by Apex Instruments, Inc.     based in Fuquay-Varina, NORTH CAROLINA (USA)

The XC-260 Hg Source Sampler is designed for performance testing, base line studies, and profiling.  This low-cost, portable, and field-proven audit system is easy to learn and use, and is ideal for sampling mercury emissions based on Reference Method 30B of the U.S. EPA Appendix K, 40 CFR, Part 60. The XC-260 Hg Audit System is used for ...

Dekati - Model Diluter - Aerosol and Gaseous Sampler

by Dekati Ltd.     based in Kangasala, FINLAND

The Dekati Diluter DI-1000 is a low-cost, simple and easy-to-operate device for diluting aerosol and gaseous samples from any source. The simplicity, ability to withstand high temperatures and the robustness of the all stainless-steel design have made it a widely renowned choice for dilution of combustion aerosols.The nominal dilution factor for a ...

Tekran - Model 3321 - Wall Mounted Sample Conditioner

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The Tekran Model 3321 Wall Mounted Sample Conditioner allows virtually any combustion gas matrix to be analyzed for total gaseous mercury, elemental mercury and ionic mercury. The Model 3321 is designed around a modular framework, allowing a wide range of applications from bench-scale research to full-scale installations. The wall-mounted design ...

Model GA 5000 - Dual Chamber Gas Analysis for Formaldehyde Analysis

by GreCon Greten GmbH & Co. KG     based in Alfeld-Hannover, GERMANY

The gas analysis method according to DIN EN 717-2 is a quick measuring method in which the formaldehyde emissions of wood based panels are measured for four hours at 60 °C. The formaldehyde emission is indicated in mg/m²h and refers to the unsealed total surface of the test samples (400 mm x 50 mm). The edges of the samples are sealed ...

Model GAS-60 - Gas Analyzer

by BTG Instruments GmbH     based in Herrsching, GERMANY

The GAS-60 Gas Analyzer measures online both free air and dissolved gas by a sequential sampling and analysis technique. Paper, board and tissue making processes have become a lot more foamy due to excessive air mixed in from recycled furnishes, high turbulence operations and dissolved carbon dioxide gas released from calcium carbonate, commonly ...

COMBIMASS - Model GA-s - Gas Analyzer Station

by BINDER Flow GmbH     based in Ulm, GERMANY

Modern biogas fermentation plants cannot meet commercial and environmental requirements without appropriate measuring and analysis technique. For the economical operation of the fermentation plant it is likewise necessary to consider the gas composition and quantity of the individual digester stages. Therefore usually a biogas flow measurement is ...

HORIBA - Model GPS5 - Gas Sampling System

by HORIBA Europe GmbH     based in Leichlingen, GERMANY

HORIBA gas samplers are suitable for volume-correct taking of gaseous samples during emission and emission measurements. This device can be used wherever gases and gaseous components must be inspected.

HORIBA - Model GA-360E/F360E Series - Trace Gas Monitor

by HORIBA Europe GmbH     based in Leichlingen, GERMANY

The GA-360E/F360E Series is a line up of units that provide ultrahigh sensitive, highly accurate, continuous monitoring of trace amounts of impurities contained in gases (N2, O2, He, Ar, H2, and Air) used in the semiconductor manufacturing process. Utilizing a cross-modulation method, GA-360E/F360 Series units have no zero drift due to the ...

Need help finding the right suppliers?

Let the XPRTs do the work for you