hydraulic conductivity monitoring Equipment

99 Results found
  • Keyword: hydraulic conductivity monitoring ×

In Situ Hydraulic Conductivity Tests: Hooghoudt model

by Eijkelkamp Agrisearch Equipment     based in Giesbeek, NETHERLANDS

Determination of the water permeability, is important for agricultural- and for environmental soil research. On the basis of the permeability factor (K-factor) irrigation- and drainage systems are designed. Also with respect to the extend of the spreading of possible pollution the permeability factor of the soil is of great importance.

VZOR - Model MARK-602 - Conductivity Analyzer

by VZOR     based in Nizhny Novgorod, RUSSIA

MARK-602 is a dual-channel analyzer for continious measurements of conductivity (absolute and reduced to 25oC), salinity and temperature for water and aqueous solutions, including deionized and ultraoure water applications.

In Situ Hydraulic Conductivity Tests: Rainfall Simulator

by Eijkelkamp Agrisearch Equipment     based in Giesbeek, NETHERLANDS

The extent to which the soil is sensitive to erosion is determined largely by the composition of the soil. Knowledge of the sensitivity to erosion is important for the development of a certain plot. The sensitivity to erosion is hard to measure. Absolute values can not be obtained. It is, however, possible to obtain a reasonable indication by ...

In Situ Hydraulic Conductivity Test: Ksat constant head permeameter

by Eijkelkamp Agrisearch Equipment     based in Giesbeek, NETHERLANDS

The Ksat constant head permeameter is an instrument that provides the means to collect data for determining in situ saturated hydraulic conductivity of the vadose (unsaturated) zone easily and conveniently. The measuring procedure is known as constant head well permeameter technique, shallow well pump-in method or borehole infiltration test. ...

In Situ Hydraulic Conductivity Tests: Guelph contstant head permeameter

by Eijkelkamp Agrisearch Equipment     based in Giesbeek, NETHERLANDS

The Guelph permeameter is a ‘constant head’ permeameter that operates in accordance with the principle of the Mariotte bottle. After boring a hole the Guelph permeameter is placed. The water from the permeameter slowly flows into the auger hole and penetrates into the soil. At a certain moment a saturated ‘bulb’ is formed and the out-flow of water ...

Model HPT - Hydraulic Profiling Tool

by ASC Tech Services     based in Rancho Cordova, CALIFORNIA (USA)

The HPT allows the creation of fast, continuous real-time profiles of soil hydraulic properties in both fine- and coarse-grained material. The HPT uses a sensitive, downhole transducer to measure the pressure response of the soil to injection of water. One primary use of this tool is to locate and define preferential migration pathways for ...

Greyline - Model Portaflow PT400 - Portable Transit Time Flow Meter

by Greyline Instruments Inc.     based in Long Sault, ONTARIO (CANADA)

Recommended for clean fluids like water, glycol, oil and most chemicals. Sensors can be mounted without shutting down flow and there is no obstruction or pressure drop. The ultrasonic signal travels through all common metal and plastic pipe materials. Flow rate and totalizer are displayed continuously along with battery status, signal strength. ...

Membrane Interface Probe-Hydraulic Profiling Tool (MiHpt)

by COLUMBIA Technologies, LLC     based in Baltimore, MARYLAND (USA)

The Membrane Interface Probe-Hydraulic Profiling Tool (MiHpt), is one of the High Resolution Vertical Profiling tools which COLUMBIA Technologies offers to detect subsurface contamination along with measurements of soil electrical conductivity (EC) and Hydraulic Profiling Tool (HPT) injection pressure in one push for environmental site assessments ...

Model OCM Pro CF - Flow Meter

by NIVUS GmbH     based in Eppingen, GERMANY

High accurate flow measurement in part filled and full pipes and channels as well as in flumes and surface water bodies. With worldwide TCP/IP communication!, suitable for MCERTS applications, medium: slight to heavily polluted, measurement principle: cross correlation.

Hydraulic Profiling Tool (HPT)

by Zebra Environmental Corporation     based in Lynbrook, NEW YORK (USA)

The Hydraulic Profiling Tool (HPT) now allows for economical, rapid, continuous, real-time profiles of soil hydraulic properties in fine-textured to coarse-grained material. The HPT uses a sensitive, down-hole transducer to monitor the matrix back-pressure response to water injection. The probe is advanced through the subsurface via traditional ...

Related Terms for hydraulic conductivity monitoring

Need help finding the right suppliers?

Let the XPRTs do the work for you