landfills Equipment in Croatia

Served | Office inNear
968 Results found
  • Keyword: landfills ×

  • Location: Europe ×

  • Location: Croatia ×

600 LFG CH4/02 Land Fill Gas Analysis System

by California Analytical Instruments, Inc. (CAI)     based in Orange, CALIFORNIA (USA)

Methane and Oxygen analyzer is housed in a climate controlled NEMA 4 or 4X enclosure approximately 48” H X 36” W X 16” D. The enclosure includes fittings for calibration gases, sample gas, and exhaust, solenoid valves for automatic calibration of each gas, inlet pressure regulator, flow meter with needle valve, particulate ...

Siloxane Monitoring in Landfill

by Protea Limited     based in Cheshire, UNITED KINGDOM

The generation of electricity from municipal digesters and land fill is of increasing interest, as the biogas can allow for a form of renewable energy. Organosilicon compounds often find their way into land-fill or digester gases as siloxanes. Siloxanes are low-level hazards to the atmosphere in terms of their emissions, however when they are ...

TANA - Model E260 - Landfill Compactor

by Tana Oy     based in Vaajakoski, FINLAND

Weight: 26000 kg. Total length: 8 260 mm. Total width: 3 660 mm. Total height: 4 320 mm. Wheel base: 4 050 mm. Ground clearance: 890 mm. Length without dozer blade: 6 640 mm. Width without dozer blade: 3 250 mm. Inside turning radius: 3 880 mm. Driving speed ranges: 0-4.5 km/h 0-6 km/h. Maximum crushing force: 127 kN.

TANA - Model E320 - Landfill Compactor

by Tana Oy     based in Vaajakoski, FINLAND

Weight: 32 000 kg. Total length: 8 260 mm. Total width: 3 660 mm. Total height: 4 320 mm. Wheel base: 4 050 mm. Ground clearance: 890 mm. Length without dozer blade: 6 640 mm. Width without dozer blade: 3 250 mm. Inside turning radius: 3 880 mm. Driving speed ranges: 0-5 km/h 0-7 km/h. Maximum crushing force: 157 kN

TANA - Model E380 - Landfill Compactor

by Tana Oy     based in Vaajakoski, FINLAND

Weight: 38 000 kg. Total lengthc 9 050 mm. Total width: 4 500 mm. Total height: 4 320 mm. Wheel base: 4 050 mm. Ground clearance: 890 mm. Length without dozer blade: 7430 mm. Width without dozer blade: 4 390 mm. Inside turning radius: 3 310 mm. Driving speed ranges: 0-5 km/h 0-7 km/h. Maximum crushing force: 186 kN.

TANA - Model E450 - Landfill Compactor

by Tana Oy     based in Vaajakoski, FINLAND

Weight: 45 000 kg. Total length: 9 230 mm. Total width: 5 000 mm. Total height: 4 320 mm. Wheel base: 4 050 mm. Ground clearance: 890 mm. Length without dozer blade: 7430 mm. Width without dozer blade: 4 390 mm. Inside turning radius: 3 310 mm. Driving speed ranges: 0-5 km/h 0-7 km/h. Maximum crushing force: 221 kN.

TANA - Model E520 - Landfill Compactors

by Tana Oy     based in Vaajakoski, FINLAND

Weight: 52 000 kg. Total length: 9 230 mm. Total width: 5 000 mm. Total height: 4 320 mm. Wheel base: 4 050 mm. Ground clearance: 890 mm. Length without dozer blade: 7430 mm. Width without dozer blade: 4 390 mm. Inside turning radius: 3 310 mm. Driving speed ranges: 0-5 km/h 0-7 km/h. Maximum crushing force: 255 kN.


Gasplasma - Gasification and Plasma Conversion Technology

by Advanced Plasma Power (APP)     based in Swindon, UNITED KINGDOM

Gasification and Plasma Conversion waste to energy technology that generates clean, renewable, local energy. Gasplasma is an Advanced Conversion Technology ('ACT') that converts waste feedstock into a clean hydrogen-rich syngas and a vitrified recyclate called Plasmarok that can be used as a building material or replacement aggregate.


DIAL for Remote Emissions Measurement

by National Physical Laboratory (NPL)     based in Teddington, UNITED KINGDOM

The NPL Differential Absorption Lidar (DIAL) is a sophisticated remote sensing system that provides rapid, accurate measurements of airborne atmospheric pollutants. The system is a completely self-contained mobile laboratory that carries a suite of additional measurement equipment to monitor meteorological parameters and ambient gas ...


Eurobent - Model GCL - Geosynthetic Clay Liner

by Eurobent Sp. z o.o     based in Swidnica Slaska, POLAND

EUROBENT is a geosynthetic clay liner produced by sandwiching a layer of bentonite, a clay mineral which expands when wet between two or more layers of geotextiles. Bentonite absorbs water from the surrounding soil, its expansion is impeded by layer pressure from the geotextile membranes creating an impermeable lining material able to be used as a ...

Need help finding the right suppliers?

Let the XPRTs do the work for you