mass flow controllers Equipment in Guam

Serving Guam | Near Guam
511 Results found
  • Keyword: mass flow controllers ×

  • Location: Asia & Middle East ×

  • Location: Guam ×

MCZ - Mass Flow Controller Test Bench

by Umwelttechnik MCZ GmbH     based in Bad Nauheim, GERMANY

Automatic testing of mass flow controllers for analog and digital MFCs. Up to 250 nominal values are automatically set for the controller being tested and the test values together with the gas pressure and the gas temperature are saved in a log.

Hi-Q - Model MASS - Flow Controlled Continuous Duty Samplers

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q's Mobile Air Sampling Station can be supplied with controllable flow rates from as little as 2 SCCM up to, as high as 200 SLPM. The unit can be equipped as either a single or dual flow air sampling system - you make the call. Have an existing Stack Flow Rate Monitor? HI-Q's MASS Unit can easily be linked together with an existing stack-flow ...

Mass-Trak - Model 810 - Mass Flow Controllers

by Sierra Instruments, Inc.     based in Monterey, CALIFORNIA (USA)

Designed to control the flow of air and ALL inert gases & mixtures, our MassTrak® Model 810C meets the same performance criteria as any industry-standard MFC at an affordable price.  Our Model 810C is available with a large LCD readout and provides two simultaneous analog output signals, 0-5 VDC and 4-20 mA. The control valve features ...

Porter - Model D2000i Series - Liquid Mass Flow Controllers

by Parker - Porter Instrument Division     based in Hatfield, PENNSYLVANIA (USA)

The Porter D2000i Series liquid mass flow controller is designed to address the need for fast, precise control of liquid precursors in semiconductor manufacturing processes, closed-loop digital control circuitry, combined with the integral proportional piezoelectric-actuated control valve, offer response times of less than one (1) second and ...

Model MFC 2152 - Mass Flow Controller

by Axetris Ag     based in Kaegiswil, SWITZERLAND

Compact mass flow controller with RS-485 EIA interface, based on the propertiarie Platinium MEMS technology from Axetris (MEMS: Micro Electro-Mechanical Systems). It offers the following  advantages

Model MFC 2132 - Mass Flow Controller

by Axetris Ag     based in Kaegiswil, SWITZERLAND

Compact mass flow controller with RS-232 EIA and analog 4...20 mA interface, based on the propertiarie Platinium MEMS technology from Axetris (MEMS: Micro Electro-Mechanical Systems).

Model MFC 2122 - Mass Flow Controller

by Axetris Ag     based in Kaegiswil, SWITZERLAND

Compact mass flow controller with RS-232 EIA and analog 0...5 V interface, based  on the propertiarie Platinium MEMS technology from Axetris (MEMS: Micro Electro-Mechanical Systems). It offers the following  advantages:

Model MFC 2252 - Mass Flow Controller

by Axetris Ag     based in Kaegiswil, SWITZERLAND

Small ultra compact mass flow controller module with RS-485 full duplex interface, based on the propertiarie Platinium MEMS technology from Axetris (MEMS: Micro Electro-Mechanical Systems). It offers the following  advantages

Model Series 730 - Mass Flow Control Valves

by Kurz Instruments, Inc.     based in Monterey, CALIFORNIA (USA)

The diameter, separation and the helical depth were designed to provide a nearly linear flow coefficient (Cv) with angular rotation. A simple high torque gearmotor (24 VDC) was selected for cost and simplicity. Since the Series 730 is a 'fail-as-is' design, the motor is only used when changes are required, which greatly extends the motor life. The ...

Sensirion - Model SFC4000 - Mass Flow Controller

by Sensirion AG     based in Staefa, SWITZERLAND

Sensirion's mass flow controller SFC4000 offers fast response times and accurate control of gas flows over a very wide range. Based on the CMOSens Technology the digital calibrated and temperature compensated sensor signal is converted directly into a signal which is used in the analog controlling circuit to control the valve. Thanks to this ...

Need help finding the right suppliers?

Let the XPRTs do the work for you