oil-in-water Equipment in Somalia

Serving Somalia | Near Somalia
18192 Results found
  • Keyword: oil-in-water ×

  • Location: Africa ×

  • Location: Somalia ×


AWAS - Model HI 1999 - Freestanding Oil-Water Separator

by AWAS International GmbH     based in Wilnsdorf, GERMANY

Universal separator with less than 5mg/l final oil content made of stainless steel EN 1.4301/ AISI 304 for free standing installation, in a building or buried tanks. The design permits to have water inlet and outlet either in front or at the side walls. LGA Bayern tested acc. to EN 858 class I with less than 5 mg/l final oil content.

Model TD-4100 XDC - Oil in Water Monitor

by Turner Designs Hydrocarbon Instruments, Inc.     based in Fresno, CALIFORNIA (USA)

The TD 4100XDC is a “Closed Cell” version of the rugged, world industry standard TD-4100 XD Oil in Water Monitor. It was designed for normally clean water applications or dirty water applications where fouling can be controlled by chemical injection or optional on-board cleaning systems. It utilizes a clear tube flow cell to contain ...

EnviroSEP - Oil And Water Separator

by Ovivo (Formerly Eimco Water Technologies)     based in Salt Lake City, UTAH (USA)

Ovivo’s EnviroSEP units provide oil and water separation for a multitude of industrial wastewater, process water pre-treatment and stormwater treatment applications. The unit is designed to remove all free oil from contaminated streams to comply with the most stringent of discharge requirements. Typically, no more than 5mg/l of oil will ...

Model TD-4100 XD - Continuous On-Line Oil in Water Monitor

by Turner Designs Hydrocarbon Instruments, Inc.     based in Fresno, CALIFORNIA (USA)

The TD-4100 XD is a ruggedized version of the TD-4100 continuous on-line oil in water monitor. The XD is designed specifically for offshore oil production, refining, petro-chemical, mining, and other industries that require robust on-line hardware for severe duty and hazardous area locations. The monitor is skid or wall mounted and constructed of ...

Model TD-4100 XDC-GP - General Purpose Oil in Water Monitor

by Turner Designs Hydrocarbon Instruments, Inc.     based in Fresno, CALIFORNIA (USA)

The TD-4100 XDC General Purpose oil in water monitor is a lower cost version of the industry standard TD-4100 XDC and is designed for General Purpose areas (non-explosive atmospheres). It was designed for normally clean water applications or dirty water applications where fouling can be controlled by chemical injection or optional on-board ...

NexTD - Next Generation Oil in Water Monitor

by Turner Designs Hydrocarbon Instruments, Inc.     based in Fresno, CALIFORNIA (USA)

Protecting the environment from unwanted hydrocarbon discharges, protecting sensitive water treatment systems from unwanted oil contamination and 24/7 monitoring of industrial processes to prevent upsets has been the sole purpose of Turner Designs Hydrocarbon Instruments and its team for over 20 years. Continuous improvement of field measurement, ...

Oil / Water Separator

by WesTech Engineering, Inc.     based in Salt Lake City, UTAH (USA)

Designed according to API 421, WesTech API Oil / WaterSeparators combine state-of-the-art separation, skimming and sludge transport technologies into a highly efficient primary oil separation device.

Leakwise - Controllers For Leakwise Oil On Water Monitoring Systems

by GE Analytical Instruments     based in Boulder, COLORADO (USA)

A Leakwise Oil-on-Water Monitoring System consists of a controller (signal processor) and one or more sensors, depending on application needs.

TurnerCIP - Clean in Place Systems for Oil in Water Monitors

by Turner Designs Hydrocarbon Instruments, Inc.     based in Fresno, CALIFORNIA (USA)

Most oilfield produced waters and other oily waste waters have high fouling potential for optical sensors. High Cost Ultrasonic Cleaning systems only address the local optical path and not the entire sample system. Our CIP (Clean In Place) addresses the entire sample system in the same way that CIP’s are used to clean heat exchangers and ...

Model TD-500D - Dual Channel Handheld Oil in Water Analyzer

by Turner Designs Hydrocarbon Instruments, Inc.     based in Fresno, CALIFORNIA (USA)

TD-500D featuring the least expensive, lightest, smallest, easiest to use, most accurate and most repeatable device on the market for measuring crude oil and condensates in produced water, de-salter tail water, tank bottoms, cargo heaters, or anywhere that crude oil comes in contact with water.

Need help finding the right suppliers?

Let the XPRTs do the work for you