oil-in-water Equipment in Louisiana

Serving Louisiana | Office in LouisianaNear Louisiana
23877 Results found
  • Keyword: oil-in-water ×

  • Location: USA ×

  • Location: Louisiana ×


InfraCal 2 - Model ATR-SP - Oil in Water/Soil Analyzers

by Wilks - A Spectro Scientific Company     based in Chelmsford, MASSACHUSETTS (USA)

The InfraCal 2 ATR-SP is recommended for measuring oil in water, TPH in soil/drilling waste or FOG in wastewater using the traditional EPA methods 413.2 and 418.1 or ASTM method D7066-04.  Measurement data obtained with this analyzer will correlate to EPA Method 1664 as both procedures are based on evaporation techniques and measuring ...

Oil and Water Separators

by Industrial Waste Water Services, LLC     based in Clarkesville, LOUISIANA (USA)

Oil/water separators are 'in-line' devices used to remove oils and greases (and sometimes solids) from industrial waste streams. O/WSs operate by employing various physical or chemical separation methods, including gravity separation, filters, coagulation/flocculation, and flotation. However, the use of any separation process depends on the ...

Smart - Model PFM 107 - Oil-in-Water Monitor

by Rivertrace Engineering Ltd     based in Redhill, UNITED KINGDOM

The monitor measures particulates in the sample stream on a continuous basis by passing the process fluid through a proprietary photo optical measuring cell developed by Rivertrace Technologies.

OCD XTRA - Oil In Water Analyser

by Rivertrace Engineering Ltd     based in Redhill, UNITED KINGDOM

The OCD Xtra combines multiple light wavelengths with multiple sensor technology, to measure oil accurately in the 0-200 ppm range, even in the blackest of produced water. Multiple oil types are automatically compensated for by sophisticated algorithms. The multi-parameter display shows the sample's oil content, turbidity, pressure and a graphical ...

CETCO MONARCH - Model CPI & SCPI - Oil Water Separators

by CETCO Oilfield Services Company     based in Covington, LOUISIANA (USA)

Operation of the CETCO MONARCH CPI Separator is simple and efficient.  Liquid flow is introduced into the CETCO MONARCH CPI separator via gravity or at a specific pressure. The CETCO MONARCH CPI Separator distributes flow and creates the necessary laminar flow for proper oil & water separation. The CETCO MONARCH CPI Separator and its ...

EnviroSEP - Oil And Water Separator

by Ovivo (Formerly Eimco Water Technologies)     based in Salt Lake City, UTAH (USA)

Ovivo’s EnviroSEP units provide oil and water separation for a multitude of industrial wastewater, process water pre-treatment and stormwater treatment applications. The unit is designed to remove all free oil from contaminated streams to comply with the most stringent of discharge requirements. Typically, no more than 5mg/l of oil will ...

Model TD-4100 XDC - Oil in Water Monitor

by Turner Designs Hydrocarbon Instruments, Inc.     based in Fresno, CALIFORNIA (USA)

The TD 4100XDC is a “Closed Cell” version of the rugged, world industry standard TD-4100 XD Oil in Water Monitor. It was designed for normally clean water applications or dirty water applications where fouling can be controlled by chemical injection or optional on-board cleaning systems. It utilizes a clear tube flow cell to contain ...

Oil / Water Separator

by WesTech Engineering, Inc.     based in Salt Lake City, UTAH (USA)

Designed according to API 421, WesTech API Oil / WaterSeparators combine state-of-the-art separation, skimming and sludge transport technologies into a highly efficient primary oil separation device.

Model TD-4100 XDC-GP - General Purpose Oil in Water Monitor

by Turner Designs Hydrocarbon Instruments, Inc.     based in Fresno, CALIFORNIA (USA)

The TD-4100 XDC General Purpose oil in water monitor is a lower cost version of the industry standard TD-4100 XDC and is designed for General Purpose areas (non-explosive atmospheres). It was designed for normally clean water applications or dirty water applications where fouling can be controlled by chemical injection or optional on-board ...

NexTD - Next Generation Oil in Water Monitor

by Turner Designs Hydrocarbon Instruments, Inc.     based in Fresno, CALIFORNIA (USA)

Protecting the environment from unwanted hydrocarbon discharges, protecting sensitive water treatment systems from unwanted oil contamination and 24/7 monitoring of industrial processes to prevent upsets has been the sole purpose of Turner Designs Hydrocarbon Instruments and its team for over 20 years. Continuous improvement of field measurement, ...

Need help finding the right suppliers?

Let the XPRTs do the work for you