oil in water Equipment in New Jersey

Serving New Jersey | Office in New JerseyNear New Jersey
5115 Results found
  • Keyword: oil in water ×

  • Location: USA ×

  • Location: New Jersey ×

Specac - Oil in Water Analysis Kit

by Specac Limited     based in Orpington, UNITED KINGDOM

Specac’s Oil in Water Analysis Kit contains all the necessary FTIR instrument accessories to implement ASTM test method D7066-04 for the analysis of total recoverable oil, grease, or petroleum hydrocarbons in water. The kit comprises of three matched pairs of infrared grade quartz cells supplied in 10, 50, and 100 mm pathlengths and a 3' x ...

Solinst - Model 122 - Oil Water Interface Probe

by US Environmental Rental Corporation     based in Waltham, MASSACHUSETTS (USA)

5/8″ diameter probe. Standard lengths of 100′, 200′, and 300′.

Heron - Model H.O1L - Oil Water Interface Probe

by US Environmental Rental Corporation     based in Waltham, MASSACHUSETTS (USA)

3/4″ diameter probe. Standard lengths of 100′, 200′, and 300′.

Model 2000 GPM - Oil Water Separation System

by ProAct Services Corporation     based in Ludington, MICHIGAN (USA)

PSI: 22 PSI operating pressure.Size: 8’ diameter X 40’ length.15,000 gallon capacity.6,000 gallon oil capacity.Equipment: McTighe Model POWS – 15,000 - P.Oil Water Separator.with two level stainless steel sensor and.Warrick series 27A1EO intrinsically safe control relay.Media: Polypropylene Media Petro-Pak.Corrugated Plate ...

Mercer - Mobile Oil Water Separators

by Mercer International Inc.     based in Mendham, NEW JERSEY (USA)

Mercer has outfitted several Utility and Petrochemical companies with standard compliance master™ units that are mounted on trailers. This flexibility is very useful for rapid deployment in the event of a spill, or for routine cleaning of pits, sumps, manholes, and various tanks. Mercer can provide secondary and polishing filters on the ...

Model 10 gpm - 30 gpm (2 - 7 m3/h) - Above Ground Oil Water Separators

by Mercer International Inc.     based in Mendham, NEW JERSEY (USA)

Our 'low flow' series offers an industrial-duty design in a compact size.  This separator series is ideally suited for smaller vehicle wash stations.  These separators are also well suited for wastewater from small sumps, small stormwater treatment applications, groundwater pump and treat systems, and various other applications.  ...

Model 50 gpm - 100 gpm (10 - 25 m3/h) - Above Ground Oil Water Separators

by Mercer International Inc.     based in Mendham, NEW JERSEY (USA)

A step above the 'low-flow' series, is our 50-100 gpm family of units.  This separator series features a true 'V-shaped' coalescer which incorporates a full-width Chimney-Zone (zero velocity solids settling area) designed to process solids down and out of the coalescer.  A coalescer design which processes the solids out of the coalescer, ...

Model 150 gpm - 300 gpm (35 - 70 m3/h) - Above Ground Oil Water Separators

by Mercer International Inc.     based in Mendham, NEW JERSEY (USA)

This series bridges the gap between 'small' separators and 'large' separators.  It is with these 'in-between sized' separators that the materials of construction become an important consideration based on performance and price.  Whether it is an environmental engineer that understands the complexities when dealing with certain ...

Model 750 gpm - 1000 gpm (175 - 225 m3/h) - Above Ground Oil Water Separators

by Mercer International Inc.     based in Mendham, NEW JERSEY (USA)

As the flow rates become larger, the importance of dedicated settling (solids) and rising (oil) zones become critical to obtain a truly non-fouling design. Not only do the Chimney Zones process oils and solids out of the coalescer, they naturally create an break in the coalescer plate, providing shorter plate widths in the flow direction. Shorter ...

Model Over 1,000 gpm (225 m3/h) - Above Ground Oil Water Separators

by Mercer International Inc.     based in Mendham, NEW JERSEY (USA)

Mercer supplies shop-fabricated units as large as can be shipped (up to 5,000 gpm or more). These are typically custom designed units with various sizes and shapes to best meet our client's field conditions. We also supply various flow configurations to maintain high efficiency and aide in maintenance procedures. Units in this size range are ...

Need help finding the right suppliers?

Let the XPRTs do the work for you