oil water separators Equipment in Nova Scotia

Serving Nova Scotia | Office in Nova ScotiaNear Nova Scotia
1009 Results found
  • Keyword: oil water separators ×

  • Location: Canada ×

  • Location: Nova Scotia ×

Oil / Water Separator

by WesTech Engineering, Inc.     based in Salt Lake City, UTAH (USA)

Designed according to API 421, WesTech API Oil / WaterSeparators combine state-of-the-art separation, skimming and sludge transport technologies into a highly efficient primary oil separation device.

EnviroSEP - Oil And Water Separator

by Ovivo (Formerly Eimco Water Technologies)     based in Salt Lake City, UTAH (USA)

Ovivo’s EnviroSEP units provide oil and water separation for a multitude of industrial wastewater, process water pre-treatment and stormwater treatment applications. The unit is designed to remove all free oil from contaminated streams to comply with the most stringent of discharge requirements. Typically, no more than 5mg/l of oil will ...

HQI - Hopper Oil Water Separators

by Hydro Quip, Inc. (HQI)     based in Seekonk, MASSACHUSETTS (USA)

Hydro Quip's Hopper Oil Water Separators are above-ground units designed for the separation of free and dispersed (non-emulsified) oil and settleable solids. Settleable solids and DNAPL are collected in the hopper chamber for removal. For pumping to downstream treatment, a model design with Effluent Pump Out Chamber is available.

HQI - Above Ground Oil Water Separator

by Hydro Quip, Inc. (HQI)     based in Seekonk, MASSACHUSETTS (USA)

For the effective separation of free and dispersed (non-emulsified) oil and settleable solids. Hydro Quip, Inc offers a complete line of Above Ground Rectangular Oil Water Separators that can be customized for your specific application. All our equipment meets or exceeds API 421 guidelines. The type of material and the type of media are always ...

Model 2852-OWS - Oil/Water Separator & Sump Alarm

by Arjay Engineering Ltd.     based in Oakville, ONTARIO (CANADA)

The sensing probe continuously monitors for the oil/water interface in a water filled sump or separator. It is typically used to control pumps, operate valves, or activate alarms. The 2852-OWS sensing probe monitors the capacitance field around the active probe tip. As the volume of separated oil increases in the separator or is drawn down toward ...

Oil/Water Separator for Liquid Separation

by Geotech     based in Leamington Spa, UNITED KINGDOM

The high capacity cost effective low maintenance compact oil water separators utilise a highly efficient coalescing media pack. The separators are fully automatic, involve no moving parts and can be supplied for flows up to 60 lpm.

HQI - Below Ground Oil Water Separators

by Hydro Quip, Inc. (HQI)     based in Seekonk, MASSACHUSETTS (USA)

Hydro Quip’s Below Ground Oil Water Separators stand out from the competition because we base our design on a Reynolds Number of less than 500. Design standard API 421 only references Stokes Law and does not address the importance of a Reynolds Number. Since Stokes Law is based on zero velocity, a low Reynolds number is required to achieve ...

Model 4100-OWS - Oil/Water Separator Level Monitor

by Arjay Engineering Ltd.     based in Oakville, ONTARIO (CANADA)

This unique oil level system provides complete flexibility for monitoring oil water separators in one complete package. The 4100-OWS sensing probe monitors the capacitance field between the probe and the concentric shield. As the oil accumulates and displaces the water, the probe capacitance changes. This interface signal is used to provide ...

MPPE & TiPSS - Model CPI - Corrugated Plate Interceptor for Oil-Water Separation

by MPPE & TiPSS Technology – Veolia Water Technologies     based in Ede, NETHERLANDS

The CPI is the basic TiPSS unit mainly used for oil-water separation. The CPI holds modular-counter-current-flow plate packs executed in GRP or Stainless Steel. The CPI basin can be executed in concrete or steel. The concrete units are specifically suited to integrate with sewer systems below ground level so that a gravity flow can be used. The ...

Model pCPI - Pressurized Cross Flow Interceptor for Oil-Water Separation

by MPPE & TiPSS Technology – Veolia Water Technologies     based in Ede, NETHERLANDS

The TiPPS CPI Pressurized is applied when the oil (or any non water miscible organic fluid) and solids contaminated feed water is pressurised or a fully contained plate pack is required (offshore).

Need help finding the right suppliers?

Let the XPRTs do the work for you